Search results

year of car would help

i am newer on this too but from what i have read you need to really put it on a dyno. you can buy a wide band fuel air gauge but its just as cheep to put it on the dyno and have a chip burned that will also let you know what else you need to do in order to improve everything

i have kinga the same problem on my gt 40s one valve on each cylander is taller than the other the post above tells about my problem

is it possible to need different length push rods for the exaust then for the intake side

yes i did find the problem well the one that didnt find me the no power was a timing issue but the big problem that found me was that i didnt shim the rockers i just bolted them down the valves were always open just a little end result was the problems listed above plus bent push rods and...

thanks for the help i got new rockers that fixed that problem and re gaped the plugs to 54 instead of the 41 i had it at that took care of the skip

ok heres what i have 1989 5.o with an aod stock bottom trick flow stage one cam cast gt 40 heads (tfs spring upgrade) 3 angle grind and surffaced gt40 cobra intake with 1 in spacer bbk adjustable fpr stock injectors 65 mm tb bbk cold air stock maf i have a 73 mm but not on it wouldnt idle right...

i have a 1989 5.o i installed a trick flow stage one cam 499/510 lift 275/279 duration. i didn't replace the lifters, push rods or rockers. i did add gt40 heads with a 3 way valve job, had the heads surfaced and the trick flow spring upgrade kit installed at 1.800" as the paper said (those were...

ok heres what i have 1989 5.0 aod auto gt40 heads trick flow spring upgrade trick flow stage one cam cobra intake 65mm tb (tps voltage set ) no spacer its made to the upper intake 70mm maf PROBLEM turns over a few times then lags then starts runs on just a little high on idle around 1500 but...

thanks

i went with a trick flow stage 1 cam gt 40 heads and the cobra intake withthe 65mm tb do i need to upgrade my injectors or will the 19 lb and the stock fpr handle this ok thanks

i think im going with a b 303 cam added to the list has anyone used this with stock heads and what can i expect thanks

Repostyle any way you can pot a pic so i can see how you done it or can you tell me where it is and how you done it THANKS

I did forget to add i am adding either 3:73 or 4:10 gears

Also thinking of adding a cam to this. Not really wanting to add a lot of HP it is a convertible but mainly wanting that head turning sound anyone got any ideas THANKS

i have a 89 5.0 i have this list of things that come with the car still in the boxes i was wanting to know a few things cobra upper and lower intake 65mm tb with egr spacer 73mm maf shortty headers bbk h pipe with headers my main question is will this TB work well with this app or would it be...