Search results

thanks for the help everyone kind of at a stand still right now the kit says it comes with new iac bolts and well it doesnt am says accufab forgot them and accufab says they never supply those and the old one broke off in the new plenum and cant extract it so waiting to hear from AM and see what...

also i took the cai and with the car off pushed the throttle to full and watched it close it closes all the way but then it clunks and seems like the cable might be a little loose is it supposed to be tight? sorry im a newb

it will idle fine after a minute i noticed while im driving it will stay at whatever rpms i left off at then it sounds like a little clunk and it drops like normal

thanks i appreciate it and it didnt come with any directions i pretty much just put everything back the way it was supposed to be and the pvc i tapped in like it said with some loctite.

Ok thanks Bullit ya it felt almost like i had cruise control on lol and thanks for the advice for the future slayer!

I just put on a 75mm accufab throttle body and intake plenum combo along with some new spark plugs and 410s and an sct tuner with a bama tune. I had to replace the TPS along the process everything went smooth until i took it for a test drive just cruising around and i noticed it idles a little...

Question for everyone I'm putting 410 gears in my mustang tonight the rear differential cover says. 75w140 only but local stores didn't have it so I got Royal Purple 85w140 will that be ok or cause problems thanks everyone!

ok so i have been getting a strong odor of fuel lately and i only drive on base really and the max i go is 30mph throughout the week i have went 36.7 miles and have burned over half of a tank and sometimes i have smoke coming from the exhaust not always just sometimes if that helps any, i have...

The only code it's throwing is o2 sensors from the exhaust, and the car did it again this morning started fine then died out 2 secs later

ive replaced the fuel filter, clean the iac and maf and it hast done it today but if the problem persists any other ideas?

called a mechanic here in town and they wanted 290 for the vacuum leak test and said tehy couldnt do the fuel pressure one due to the fact that i dont have a schrader valve on the fuel rail

so dont get them? I am cleaning the iac and maf right now thanks nightfire

will try to get a video whenever it decides to do it again

Im still having issues with the car dying out at times right after starting, i replaced the fuel filter with no luck, i was told to have a fuel pressure check done and could not bc my fuel rails dont have a schrader valve to bleed or check pressures with. Currently the car has KNN CAI and O/R...

welp still the same issue?

Just replaced the fuel filter already running smoother, as far as the proccess found out my fuel rail doesnt have the pressure release schrader valve so had some issues at first

easy to do fuel filter and if so where is it located?

For those tests just take it to a ford dealer?

I have an 04 Gt and havent had any issues the last month and a half ive owned it the last 2 weeks randomly when i start it it will try and try to turn over then just wont so i will try again and most of the time it will start fine. But sometimes it will start and idle weak and die a few seconds...