Search results

rims interested in the rims, but what size are they ? 17 x ? e-mail pics to me at [email protected] Thanks

MCA "No Borders" Mustang Show - for the 1st time ever, there will be a Mustang Club of America "National" Show outside the borders of the USA, and I'm happy to say it will be hosted in Oakville, Ontario by the Golden Horseshoe Mustang Assoc (www.ghma.on.ca) August 1,2,3 at the Ford of Canada...

MCA "No Borders" Mustang Show - for the 1st time ever, there will be a Mustang Club of America "National" Show outside the borders of the USA, and I'm happy to say it will be hosted in Oakville, Ontario by the Golden Horseshoe Mustang Assoc (www.ghma.on.ca) August 1,2,3 at the Ford of Canada...

when you mill the heads..... I know because I did this..... I don't know if it applies to all engines, but on my 351C, I milled the heads 30 thou and the intake 10 thou and it fit perfectly. I was told by an expert on these engines that for every 30 thou you remove from the heads you take 10...

Sounds like a sound plan, but I would do the brakes at the same time, or do them 1st ! they may save ur life !

ooops ... I didn't notice I didn't notice that you said a 750 VAC SEC.... thats different. The secondaries use a metering block, and you have to buy the complete metering block I think to change the secondary jetting. In would try going to a lighter spring in the secondary actuator, this...

73 351C the engine is the same though in 1973 the 351C is smogged out with 8.5 to 1 compression compared to 11 to 1 in 1970. Check the heads on this engine, they could be either 2 Barrel (2V) or 4 Barrel heads (4V). This can be told by looking at the front corner of the drivers side head...

ask these guys.... ask these guys what to use, they are experts on this conversion, and they sell the parts (new) also. www.mpbrakes.com your welcome Mach1steve

don't guess go to this link for chart of69 rims & tire sizes that are proven to work. http://www.dodgestang.com/Tire%20Fitment%20Guide%2069-70.pdf your welcome ! Mach1steve

I wouldn't spend any money makin it handle better in the corners until you get rid of those **** Drum brakes, those things are scary man. Look at a kit from MP Brakes www.mpbrakes.com As far as suspension goes, I would use rubber bushings, not the Poly urethane/graphite stuff out there, to...

I used similar On a built 351C I used front 70's front & back 80's on a 650 Double Pumper Holley. You have to play with it. The fronts are easy, keep droppin em until it runs like **** when you accelerate then go up 2 sizes. The backs, you just keep goin until it bogs when they open, or...

great idea ! I didn't think of the newer style Mach1 wheels ! thanks ! Mach1steve

already have that Hi Thanks but I already have that PDF It only shows me 16 x 8" and a small tire size, and a 17 x 9.5" which I can't get in a Magnum 500. I'll keep trying. Thanks again. Hope it helps the original poster though ! Mach1steve

same boat ! Hi I'm in the same boat, only with a 73 Mach1. It has a big block in it, and I want to do it up like a 71 Mach1 429 clone. I have to buy all new rims & tires so want to go with bigger than stock Magnum 500's. National Parts Depot has them in 16 x 8" and 17 x 8" both with a 4.5"...

fancy rotors a little fancier than what you might want, but this company sells Crossdrilled & Slotted Rotors for those that have done the Granada swap. Straight bolt in peice www.muggziperformance.com Regards Mach1steve

phone these guys and ask... www.p-s-t.com

lotsa options... 1967 was the 1st year of the big block for the Mustang, thus introducing the 390GT engine. That means that anything in that engine family will fit.... 390GT, 427, 428 though yes, it is tight to change plugs, but you should only need to do so once per year. Another quite...

use the Felpro gasket set and use Clevite 77 bearings, otherwisw they are similar. But make sure it is complete.

68 larger dia the 68 disc brake spindles are larger I am told.

post question here.... I would post that same question here... http://fomoco.com/mustang-forum/ for a more comprehensive answer. Mach1steve