water pump

Can y'all help me identify the hose to the left of the bypass hose connected to the water pump? I need to replace it at my was old and brittle so it broke when I replaced the water pump. The hose is still attached in the first picture. Thanks in advance!

yesterday I was changing engine oil when I noticed that there is some coolant leaking (one little hot drop on My Head :scratch:). As I replaced the water pump last month so I thought one of the hoses claps not tie enough. I start inspecting and I found some rust and little coolant drops coming...

93 mustang gt 302 5 speed. Currently I am running only the130 alternator/ water pump and crank. I bought an alternator bracket from amazon and removed the stock bracket with the tensioner. Now I’m also going to be converting to electronic fans. My issue is now, since my belt routing will be...

I see I am not the first with this issue but I would love it if it were a short bolt or just broken off at the head. oh no, not that easy. instead, I broke one of the longest ones that goes to the ps pump. It broke at the place the threads start so mine is probably 4" in the engine. thoughts...

Well....1990 gt with new aluminum radiator, timing cover, timing chain, water pump(stock reverse flow), and all new hoses. And I’m not getting coolant flowing through upper radiator hose, even if I remove thermostat. Flowed before new parts. I started her up finally and after warm up it got...

Hi All, I was trying to replace the water pump in my 03 v6 mustang but the black heater tube that comes out of the top of the pump doesn't seem to come off. I tried tapping it with a hammer and a screw driver, but it won't budge. I didn't want to puncture the tube with the screw driver, so I...

Hey everyone, new to the site. I'm having a problem with a proform electric water pump I bought. I took everything off (idle pully, power steering pump, and alternator) went to put the new electric water pump; the power steering/ alternator didn't fit back in its original position. Has anyone...

I am about to build a 331 stroker to put in my 1995 GT. I have looked at threads on multiple forums but cannot find the answers I am looking for so any help would be great, thanks. (Carbureted, A/C Delete, No smog) 1) what water pump should I use? Do I need a High Volume water pump or will a...

im not really sure where to go from this point so i decided why not give this a try, maybe someone might have a clever idea. i have an 83 fox that i just put a new 2 core aluminum rad in as well as a new water pump. the motor is a carbureted 306 with a comp cam edelbrock heads an edelbrock...