Will they fit on a fox stang? Gonna get a new set of shocks and struts but they cost more than 94-04 struts and shock packages....
94-04 sturts on FOX stang 1993....
- Thread starter 93 LX
- Start date
-
Sponsors (?)
I believe that the 94 up struts are 1" longer. I've seen people use them before, but if your car is lowered at all you may have problems bottoming out the struts. Stick w/ the proper strut in my opinion!
trbkrb
Founding Member
84t-top is right. They are longer. But if you have SN95 spindles and your car is not lowered much at all, you can use them. SN95 spindles have a lower mounting point, thus the longer struts. I have Bullitt struts with my spindles and don't really have a bottoming out problem. Some guys have used the spring & strut packages on their Fox cars and they work out pretty well.
Saleen0679
10 Year Member
hmmmm interesting.... maybe I will take a chance.... Anyone using them now? Whats your experience?
Saleen0679
10 Year Member
I ran into the MM article while researching shock options. It did get me thinking a little, but I don't have any experience with the SN95/Fox setup nor have I run across anyone that has used it.
TenorPlayinGuy
Founding Member
Just an FYI, that article is about the rear shocks, not the front struts. I would assume the same idea applies though.
I have seen that people use Mach 1 or Bullitt springs and sturts/shocks on fox cars but I havent seen anything bad or wrong with it.... maybe someone here who has done the mod can comment.
Kumm3
Founding Member
I have 03 Cobra struts with MM Coilovers, on a lowered Fox w/95 Spindles.
No issues here, and even before the coilovers I was running FRPP C Springs, and still never bottomed out.
No issues here, and even before the coilovers I was running FRPP C Springs, and still never bottomed out.
Shakerhood
Dirt-Old 20+Year Member
Similar threads
