Well Ive searched and have found alot of great info but nothing to solve my vibration problem.
Car is a 93 Coupe. TKO 600 trans, FMS Aluminum DS, Auburn Pro Locker, 31 Spline axles, and FMS 4.10 gears.
Vibration happens at 70mph and continues at higher speed but doesnt get worse.
No vibration under 70mph. I can put the trans into neutral and the vibration is still there. The vibration is so bad I cant see out of the rear view mirror.
Ive tried 2 sets of wheels/tires, U Joints have no play, and the wear patern on the gears looks good.
I also have a gear whine under deceleration.
Could a bad bearing in the rear cause a vibration like this?
Also how much play should there be between the splines of the axle and the internal splines in the carrier?
Any help would be awesome!
Thanks,
Ken
Car is a 93 Coupe. TKO 600 trans, FMS Aluminum DS, Auburn Pro Locker, 31 Spline axles, and FMS 4.10 gears.
Vibration happens at 70mph and continues at higher speed but doesnt get worse.
No vibration under 70mph. I can put the trans into neutral and the vibration is still there. The vibration is so bad I cant see out of the rear view mirror.
Ive tried 2 sets of wheels/tires, U Joints have no play, and the wear patern on the gears looks good.
I also have a gear whine under deceleration.
Could a bad bearing in the rear cause a vibration like this?
Also how much play should there be between the splines of the axle and the internal splines in the carrier?
Any help would be awesome!
Thanks,
Ken