I found a set of J180 Baer calipers from an 05+ Mustang kit (kit #1261159) , does someone have a link on how these may work on a fox with SN95 Cobra brakes. Thanks in advance!
Brackets are useless to you.
Baer does sell brackets to work with SN95 spindle.
P/N CBK322325. $135 each
You can then run the cobra 13" rotor with them and it's all bolt on
Will look something like this, except say Baer since they use the same PBR castinh
However, you are spending $280 shipped for the correct brackets. I think you said you already had cobra brakes, so you can reuse your rotors, and possibly the brake lines
They are an upgrade over the c4/Cobra style caliper. Stiffer, more swept pad area, cheaper pads. Is it That much better than a cobra caliper? Prob will never see a difference unless you open track. I did it anyway
Unsure if you would be able to find a buyer for the 2005+ brackets. I could be wrong though. I'd try fishing the caliper brackets on eBay first if you want to try to run them. You could also sell your cobra calipers.