blow by after paxton install

[jstanger89]

anybody with any suggestions on how to eliminate the oil blow by i'm getting on my 89 GT i recently installed an SN92 blower and it runs awesome but i'm still getting blowby. I've removed the hose from the valve cover to the TB and also put a k&n breather filter on my valve cover and i also am running a hose from my pcv valve to a port on my anderson power pipe on the intake side(non boosted) I'm really not sure what to do or how to hook up a catch can which some of the import boys around here have been suggesting to me. thanks for any advice, (pics of catch can setups would be helpful)

 

[84Ttop]

Usually a lot of blow by = worn piston rings!

 

[90lxcoupe]

try taking the rubber grommet, and PCV valve completly out and plugging it. I used a piece of aluminum for myne. that might help, but if the rings are worn there isnt much you can do.