Disc ebrake cable

[mikeflys1]

With the sn95 rear disc swap do you just use the sn95 cables or is there anything else to it?

 

[mikeflys1]

bump

 

[steve1676]

i just used the cables from sn95, they are fine

 

[trbkrb]

On the 93 models, you can use the SN95 cables directly since they have the same ebrake setup. For the earlier cars, you would need the bracket that is located in the driveshaft tunnel on the 93 up cars to use the SN95 cables. Otherwise you can use the FMS cables from the Cobra brake package, FMS M2809A for the sides, and M2910A for the center. Or you can use 84-86 SVO cables instead of the M2809A cables.

Matt has all the info on his website: http://svo73mm.cjb.net

 

[mikeflys1]

ahh excellent, thanks guys