Found my fuel leak! But...

[JC 25TH]

Hey, I have been experiencing some pretty poor gas milage and found a leak in my line yesterday. It is in the line that runs to the fuel rail. The only problem is...ford discontinued making these and I can't find one ANYWHERE. What is everyone else doing? I am thinking that my only option now is to go to stainless lines, but I don't know how I am going to get an AN fitting on the hard line from the tank. Suggestions?

 

[93 LX]

Well you could search the boneyard but I try this web site.

www.fordpartsonline.com

ask for Gary Star

-a

 

[jeffbigwood27]

Hey summit makes a new fitting that plugs into the rail and has an fitting on the other side check it out.

 

[JC 25TH]

Hey summit makes a new fitting that plugs into the rail and has an fitting on the other side check it out.

I saw that fitting in summit and that was what i was going to use to connect the braided hose to the rail, but i don't know how to connect it to the line from the tank though.

 

[jrichker]

Buy a 37 degree flairing tool. See http://www.mscdirect.com/IWCatSecti...ol&NameVector.length=1&View.x.x=47&View.x.y=6 for the tool & http://www.amazonhose.com/default.asp for the hose and AN fittings. Not cheap, maybe a poll of the boneyards is a better deal

 

[JC 25TH]

While browsing through the summit site, I came across some fittings that say they work without flaring the hard line. Would these work in my situation? Here is the link.

 

[jrichker]

While browsing through the summit site, I came across some fittings that say they work without flaring the hard line. Would these work in my situation? Here is the link.

If it does what it says it does, you are good to go...