Got the KB installed !

Mustang_GT_02

New Member
Mar 24, 2004
124
0
0
So I have been over due with this since I have had a lot of stuff going on with school but first of let me thank Mike Post for all the help and great communication.

I got the KB used from a guy that got in an accident for those who didn't know, and was thinking about installing it myself but I had to go to Europe for 2 weeks and though might as well have it installed somewhere.

Mike Post at DynotuneMP took the job right away and let me drop of the car at his house even though he was in the middle of moving, while I was gone he was great with keeping me updated and sending pics of the progress, there was a couple of things missing or damaged that he took care of and he really fixed up the inter cooler that came with that was all busted.

I asked for a very safe tune so the car made 380hp and 412tq @ 10.4psi with air/fuel around 11.6 im sure I could have goten more out of the car but im good for now, since it is my daily driver.

I am very pleased with the results and the drive ability of the car is great.

So once again thanks Mike!

n196600075_31354449_2342.jpg


n196600075_31354440_9404.jpg


n196600075_31354441_9734.jpg


n196600075_31354442_60.jpg


n196600075_31354443_382.jpg


n196600075_31354444_703.jpg


n196600075_31354445_1027.jpg


n196600075_31354446_1350.jpg


n196600075_31354448_2007.jpg
 
  • Sponsors (?)


Very nice!
Although, Im curious as to how you come up with the 10.4 psi?
From the pics, it looks like a 3.33 pulley = 9 psi.

Only reason I mention this is because your car makes identical hp to what mine did with the 9 lb kit. I went with 2 steps smaller pulley and tuned it. Now Im only putting 11 psi out.

Glad you got you a KB. :nice:
 
Very nice!
Although, Im curious as to how you come up with the 10.4 psi?
From the pics, it looks like a 3.33 pulley = 9 psi.

Only reason I mention this is because your car makes identical hp to what mine did with the 9 lb kit. I went with 2 steps smaller pulley and tuned it. Now Im only putting 11 psi out.

Glad you got you a KB. :nice:

thanks everyone, cuz thats what it said on the dyno sheet so thats what im assuming it is but you are right it is only the 3.33 pulley