HELP! Throttle cable stuck cuz of vacuum hose!

[downsouthman1]

Last night in the sub-freezing temperatures I installed my C&L Intake Plenum/Accufab 75mm TB combo. Now I can't go WOT cuz a vacuum hose is in the path of the throttle cable. What can I do?

 

[dougs01gt]

I had the same problem and i just pushed the tube out of the way. It should rotated with some light pressure. Atleast mine did.

 

[KconoverK]

I just held the hose out of the way and I zip tied it

 

[spree]

i got this tip from another thread...just take a few washers and put em up on the throttle cable link assembly (or whatever it's called). That'll hold it up higher, therefore move the throttle cable higher, and give you just enough clearance to get past that hose

 

[downsouthman1]

That's what I did. I put 3 washers under the bracket per bolt & it's fine now. Great gains. A very highly recommended mod. I can smoke tires all the way through 2nd gear w/ the 4.10s.