Idle problem

[stangla2]

Does anyone know how to solve a idle problem on SN-95 w. 306, afr 165, E-303, 24# injectors, 76 mm maf, ??


I have tried everything including a new idle speed control sensor new maf sensor, chip, but the idle still ranges for 500 - 2000 rpms


Thanks in advance for the help


Latz

 

[Rootus]

Do you have a chip or EEC tuning device? If not, you'll probably never get it to idle very well, because of the narrow LSA on the E cam. You could raise the idle manually to 900 or so, and it should help some.

Dave

 

[mancuso4130]

same problem

Hi,

Im having the same problem with mine and running the same combo as you with 30lbs. I am going to get it tuned and chip burned on Wed so will let you know the outcome.
Ford sent me something on idle as well, goes something like this/

Start motor and get it to operating temp.
disconnect idle bypass harness, if engine stalls-adjust throttle plate till it idles and your comfortable with it
Adjust TPS till you get .96-.99 volts
Disconnect neg battery terminal to reset computer

And thats it. They say if you did it in order, you should get a nice idle. Thanks, mike