I was just wondering if you guys could help me figure out if what I have got planned will get me to the 400 hp range from a 351w and maybe somewhat decent gas milage. And if not what would get me there.
Here goes:
1974 351w block
stock crank and pistons
afr 185 heads
performer rpm intake (maybe air gap)
Holley 4 barrel 750 cfm
custom cold air intake from spectre performance
Super comp long tube swap headers
3" exhaust
toploader 4spd
and I have no idea what gears I have in the back
Oh and any recomendations for what type of cam I should use are welcome (ie. hydraulic, hydraulic roller)
All this will be going into a 66 coupe
Thanks for any info
Here goes:
1974 351w block
stock crank and pistons
afr 185 heads
performer rpm intake (maybe air gap)
Holley 4 barrel 750 cfm
custom cold air intake from spectre performance
Super comp long tube swap headers
3" exhaust
toploader 4spd
and I have no idea what gears I have in the back
Oh and any recomendations for what type of cam I should use are welcome (ie. hydraulic, hydraulic roller)
All this will be going into a 66 coupe
Thanks for any info