need a little help

[disturbdgt]

ok so this coming monday i will be installing my bbk longtube headers finally. I will have a lift to use to put the car on also. My question is, what would be the easiest way to drop the k-member off the car while on the lift. I have found this write up (Mike's 2002 Mineral Gray Mustang GT Pictures : Mike's Mustang - Pictures, Videos, Write-ups, How to's, Parts for Sale, Guest book) but dont know if i actually have to do all of this while having the car up on the lift. So if anyone could point me in the right direction to what exactly i have to do to get the k-member off on the lift i would greatly appreciate it.

 

[Dark_Horse]

You should just be able to drop the k-member with the engine supported. you'll need some kind of hoist or cherry picker to support the motor while you drop the k-member. But it's pretty straight forward after that

 

[disturbdgt]

so i should be able to use something like this to support the engine while i drop the k member correct?
- Harbor Freight Tools - Quality Tools at the Lowest Prices

 

[Dark_Horse]

Yah you could try that, but if you do it correctly you won't need it. Take a look at this write up for some more ideas/info:

Welcome to FnSweet.com

Hope this helps man!