pitta help need advice

[BlackO3GT]

next weekend im going to be installing my vt cams and i have a set of the bbk valve covers on my motor. When i installed them they were not fun putting on. Well i was wondering if i unbolted the motor mount and lifted the motor up a little on each side will it be easier to take the covers off??? The bbk covers are larger than the stock ones. The hardest part was getting them to fit over the cam caps and the master cylinder. Well looking for advice thanks.

 

[damacman]

I pulled the four bolts from the master cylinder assembly and was able to move it out of the way enough to get the drivers' side on relatively easily. Wish I had of done that originally instead of screwing around for an hour trying to get it to fit . . .

 

[BlackO3GT]

those four master bolts were tough to get at. When ur under your dash cramped up and the wrench only moves a 1/4 inch loosing and if u move the wrong way you hit the seat button and it starts moving towards you lol lol

 

[damacman]

Now that gave me a chuckle. I did the exact same thing, strung a few seven letter words together, then moved the seat back . . . at least twice!

I take it that helped?

 

[BlackO3GT]

< that was me when that happend.