Using a 94-95 5.0 intake on 89 5.0...help!

[91LX_5L]

Will it work? What is needed? Do you need the Throtte Body off a 94 intake? The reason is I have my stock and my buddy with a 89 needs one.

Thanks!

 

[ALMOSTFINISHED]

If i remember correctly the only difference is the curved elbow to fit the throttle body due to the strut tower. remove the elbow and just install the egr/throttle body and u should be good to go. once the elbow is removed it should be just like an 87-93 intake i would presume. dont quote me tho, i am going on experience from magazines such as summit and jegs. they sell the aftermarkets like trick flow and cobras then below sell the elbow...sorry to babble

good luck
Nick

 

[urban96]

you would need a 94/95TB with sensors and a 94/95 throttle cable. you would also need to plug the EGR hole in the elbow of the intake

 

[91LX_5L]

Well I got a complete upper and lower and complete throttle body. All I need is a throttle cable from a 94 mustang or what?

 

[urban96]

almost 100% positive because those are all the same parts that you need from a fox if you wanted to swap a fox intake into a 94/95

 

[91LX_5L]

thanks...ttt if anyone wants to add somthing

 

[Soupy]

thanks...ttt if anyone wants to add somthing

SN tech tip

Goto item 16 and back into your application. Good luck.

 

[Mustang5L5]

Sn95 5.0 stock intake is more restrictive than a Fox stock intake

 

[jwzg]

Uhhh, I don't think this is a good idea at all. First, it's already been pointed out that the SN manifold is more restrictive than the Fox body's. Second, your going have to do too much work to make it fit. Why not just hit the local junkyard or Ebay to get a stock upper. At most it'll be $50 and a hell of a lot easier to install. Use ye old heads here.

 

[Aeroguy315]

ive got a stock upper, you can have it just pay for shipping [email protected]