I am hooking up a switch so I can turn off my electric fan when I want. My question concerns the switch hook up. The toggle switch has two wires, one connects to the relay, to what do I connect the other? Thanks in advance.
the other wire will hook to whatever the wire on the relay you connect to supplies (12+ source or ground).stock50LX said:I am hooking up a switch so I can turn off my electric fan when I want. My question concerns the switch hook up. The toggle switch has two wires, one connects to the relay, to what do I connect the other? Thanks in advance.
POS5.0 said:As an electrician by day, i can tell you there is a really easy way to wire up your fan.
Black fox, i must be missing the boat on what you are saying.BlackFox5.0 said:I have only the ground of the switch side in my interior, the SWITCHED side (the side that handles the high current is grounded in the engine bay)
I didn't really understand what you were asking me. I have no problems, nor have I had any problems running my electric fan for over a year now, When I race during the summer, I use the switch to cool my car before runs, I would leave the fan on for a while at a time, no problems.....when I use the A/C it is on with the compressor. maybe you miss interpreted my post, or I just put it the wrong way or with insufficent detail. If thats the case, then my apologies....
IndyBlk5.0 said:i want to do a 3 way toggle switch, i am going to be running a 70-75 amp relay... my fan is a dual speed, how do i wire this three way toggle switch to it?