i have a 93 2.3l mustang, a 5.0 engine and auto tran out of a 92 and a 87 5.0 donor car without the engine or the tran. my question is will the wiring harness from the 87 work with the 92 engine and tran? the 87 was origianaly a man tran. my master plan is to put the 92 5.0 into the 93 and use the 87 for parts
wiring harness
- Thread starter mcgsmacks89
- Start date
-
Sponsors (?)
You need an engine harness from a 92-93 v8 mustang. This will match your dash and headlamp harnesses and you shouldn have any issues.
My bad I read your post wrong, if you have all the 87 harnesses and the ecu it will all hook up to the 92 motor and tranny.
ID89GT
10 Year Member
You could swap it all over, but keep in mind it will be a speed density setup. If you really wanted you could swap over the 87 body harness then pick up an 89 mass air harness and that would work as well 
