WTB heads for 289

Discussion in 'Classic Mustang Specific Tech' started by 1fstpony, Apr 5, 2007.

  1. looking for a set of heads that will on my 289, they need to be complete and ready to bolt on.Let me know if you have anything.Thanks:nice:
  2. I have a set of 65/66 steel heads with 1.94 and 1.60 valves. The valves/springs and valve job only have about 200 miles on them since new. I pulled them off and replaced with some Jegs aluminum heads. I want $350 for the heads + shipping. I also have a set of Erson 1.6 roller rockers to go with the heads. I want $100 for the rockers. I do not have any stock rockers, so before you could bolt-on, you would need rockers.

  3. :Zip2:
    I've been looking at a lot of your posts and they seem to be all smarta$$ remarks, including the one in the thread about how much ATF goes in the trans, you said "alot".

    That aside, I have a set of complete original 66 289 heads I can get to you cheap, and I also have a set of brand new GT40p heads complete with new valves/springs/proform roller rockers I can get to you too.


    I think i talked to you on the phone recently about the heads, never mind LOL