Stock 5.0 intakes...

[ryan218]

just a quick question....whats a ported upper and lower stock intake worth?

"this is a fox style upper and lower intake. included is a felpro gasket kit. everything you need to install onto your 302 motor for an EFI application. The intake has been ported a little, and gasket matched, for better then stock flow. the mounting surface has also been cleaned up to ensure a good seal"

 

[nonglossjason]

nothing dont waste your money

 

[Bad92GT]

agreed

 

[Turkey Sammich]

Save up for something else, or the cobra intake you typed about awhile ago.

 

[ryan218]

Save up for something else, or the cobra intake you typed about awhile ago.

well i can get it for free...thats why i ask....my intake is all dirty as hell anyways...maybe i just swap them out for the time being since i most likely will be pulling it to do the injectors what you think? worth a 30 min drive?

 

[91ghp5.0]

Free parts are always worth a 30 minute drive.

 

[Foxfan88]

unless the intake is ported really good i wouldnt bother.

see if he has some flow sheets on the intake, if not you really have no idea how it flows and IMO wouldnt be worth it. but if its free then what the hell lol

 

[Turkey Sammich]

Its not free, if you have to drive 30 minutes to get it. ****in gas prices.

 

[ryan218]

Its not free, if you have to drive 30 minutes to get it. ****in gas prices.

ah its just a little gas yeah right 3.19 a gallon

 

[Turkey Sammich]

Lucky. Its 3.38 out here.

 

[ARTTII]

just a quick question....whats a ported upper and lower stock intake worth?

"this is a fox style upper and lower intake. included is a felpro gasket kit. everything you need to install onto your 302 motor for an EFI application. The intake has been ported a little, and gasket matched, for better then stock flow. the mounting surface has also been cleaned up to ensure a good seal"

Uh... I think that "free" intake is forsale for $75 on Craigslist, Columbus

You posted a copy/paste directly from his ad, correct?

Here is the link, http://columbus.craigslist.org/pts/325912218.html

Hope I'm wrong, but it just seems like to big of a coincidence

 

[93tealstang]

I have a T-moss lower and a Fox Lake ported upper. I paid about 230 shipped for the combo. Mind you, they're both professionally ported.

 

[GTOreturns]

A ported stock will find you a "little" extra power but I would save up for a Cobra or Explorer. Its an hour of driving round trip and its gonna take you a day to put it on.
Dam!! Im only 3.07 a gallon!

 

[Venom351R]

ah its just a little gas yeah right 3.19 a gallon

Lucky. Its 3.38 out here.

Dam!! Im only 3.07 a gallon!

$2.95

 

[GTOreturns]

$2.95

Im talking 93 octane!

 

[Boss 351]

not even worth it... save your time and money.

 

[90blacknight]

Ported "a little" as in "I took a dremel to it"? Was it done professionally? If so it might be worth the 30 minute drive, especially if it's free. Hell I drive 45 minutes to work. I run a ported stock upper and lower. I'm looking to get it on a dyno soon and will post results.

 

[93tealstang]

I'm looking to get it on a dyno soon and will post results.

With my ported intakes, and full exhaust this weekend I dynoed at 212hp/275tq. to the wheels. Not bad for just that little bit of mods.

 

[ryan218]

Uh... I think that "free" intake is forsale for $75 on Craigslist, Columbus

You posted a copy/paste directly from his ad, correct?

Here is the link, http://columbus.craigslist.org/pts/325912218.html

Hope I'm wrong, but it just seems like to big of a coincidence

yeah..thats the one...i have an amp that i got for free from a buddy that he is interested in trading for it(all of whats seen in the pic).....

and it's about a 15 min drive after i maps quested it...

 

[Mr. Rustypwnz]

buy my pro ported one from me, extrude honed and all!! cut for a 75mm tb, drilled and tapped for n2o.