Springs question

[DcDisturbed947]

Ok so I'm gonna be lowering my stang in the next couple of weeks.
First I wanted to ask you guys who have dropped it an inch and a half, how much did everything cost? Parts and labor.
I called steeda asking them how much if I just took it in and they did it for me and they staid $800+ waaahahhahaha, so yeah I'm not going there.
Whats a good price?
Thanks!

 

[Skymarshal]

BBK Progressive springs - $200 delivered - Ebay

Labor - $0

New cuss words learned - 2

It's not too hard to do yourself, even if you are only a little handy. There are write-ups on the procedure on several sites. You do NOT need to use a spring compressor, and you do NOT need to remove the tie rods if you don't want to.

 

[DcDisturbed947]

BBK Progressive springs - $200 delivered - Ebay

Labor - $0

New cuss words learned - 2

It's not too hard to do yourself, even if you are only a little handy. There are write-ups on the procedure on several sites. You do NOT need to use a spring compressor, and you do NOT need to remove the tie rods if you don't want to.

I probably could do it myself but I don't want to. I rather pay a little more for convenience and less hassle for me.
Anybody know what labor should cost me?

 

[kstang69]

$200

 

[fastmax]

That is probably what I payed to lower mine. But I got a sweet deal on new Koni Sports $400 for the set otherwise I would have payed 8 to 900 for them. With all my parts and labor, somewhere around $2000.

Matt

 

[94 3.8l stang]

200 even is right...