Zex adjustable kit installed on my ride. I set it for the 100 shot. Next up, I have to add the purge, blowdown tube, bottle gauge and heater
what I did on my saturday
- Thread starter Poisoned Pony
- Start date
Zex adjustable kit installed on my ride. I set it for the 100 shot. Next up, I have to add the purge, blowdown tube, bottle gauge and heater
-
Sponsors (?)
bullitt_2620
Member
Sick bro that looks like too much fun. I remember your car spitting flames when I was behind you...ha now I wont even be able to see the flames because you will leave me in the dust. 
if you don't mind the higher asking price or can find a deal on a used one, I'd go with the Accufab setup. I went with the Trick Flow setup because it's satin finish goes with everything I'm doing on the GT
mazen189
Member
mustangman9812
10 Year Member
Nice Setup!! I love my Zex Kit and I know you will! I have had mine for about 1 year with not problems at all, Looks Good!
Tim2002GT
Founding Member
Congrats on the new kit! Just one question though. Why did you mount the nozzle so far from the throttle body? I've always heard they should be mounted 6-8" from the tb blade.
BennyBlown2v
New Member
Congrats on the new kit! Just one question though. Why did you mount the nozzle so far from the throttle body? I've always heard they should be mounted 6-8" from the tb blade.
I mounted it there for ease of access and so it's on a flat spot. It's still within 8", barely
Looks great! Do you have a wideband in the car? How are you tuning?
Nope, no wideband. I'm signed up with Amazon Racing for August when they come out here for a dyno day
2000fordstanggt
Member
hah..i was about to ask the same thing about the nozzel positon from the t/b. ive always heard that too, and that you wont be getting your full shot unless mounted closer.
i really dont know how accurate that is, though.
either way niiiiice
i really dont know how accurate that is, though.
either way niiiiice
EPIK
Member
bumping for this for Epik to see since we were talking about it
D@mn... That looks good Matt. Chad did some clean work. Where is Amazon doing there tuning session @?
The GT is gonna be pretty nasty now. Looks like you will be giving some of the local Termi's a run for there money now....
Stark77
Member
SVTLaser - lololol
I installed my nitro right at the elbow bend, so the fuel will be pulled directly into the throttle body instead of spraying/splashing on the 90 degree bend. My instructions said to place about 6 inches from the TB. That ZEX setup looks nice, I like how they have the computer control unit to handle both input/output lines. I went ahead and slapped on the Typhoon intake manifold after some porting/flash removal work just to be on the safe side. I don't want to turn my hood into a shaker quite yet.
I installed my nitro right at the elbow bend, so the fuel will be pulled directly into the throttle body instead of spraying/splashing on the 90 degree bend. My instructions said to place about 6 inches from the TB. That ZEX setup looks nice, I like how they have the computer control unit to handle both input/output lines. I went ahead and slapped on the Typhoon intake manifold after some porting/flash removal work just to be on the safe side. I don't want to turn my hood into a shaker quite yet.
Chad's wiring is the ****nit
They're doing it down at Jeff S' shop in San Jose, SVTP thing.Next I'm gonna step down to 3.73's. I would of done better against that 350z had it not been for my gears IMO
When I did my buddies I put it on the bend but he forgot the silicone. So I used JB weld and told him to get the paint in whatever color he likes then I will finnish sanding it and paint the whole pipe with the nut in place so it should look a little cleaner
View attachment 313538
View attachment 313538
Similar threads
