1989 notch....tw heads, performer intake, anderson n41 cam shaft, 3.73s, c&l mass air with 30lb injectors, upper and lower control arms, subframe connectors, manual steering rack, bfg drag radials, upr tubular front k member, 3 1/2 draglites upr front and 8inch draglites in back. its a t5 with a spec stage 3 clutch and the battery has been moved to the trunk. Just curious what similar setups make!
what kind of power and 1/4 mile times should this be turning?
- Thread starter Modular2v
- Start date
-
Sponsors (?)
1991notchbackLX
Active Member
Well, judging by your sig it looks like you bought it. Congrats! I'd say a setup like that, if tuned properly, would make anywhere from 275-300 horsepower. Those Anderson cams make good power. Those injectors are oversized for that power level but they can be tuned around. Are there drag radials, full slicks or street tires on the Welds? With traction and a good driver 300 horsepower on a coupe has high 11 second potential. Take it out for a run and let it eat! 
He said BFG DRs... Never know, but the car should definitely be capable of mid 12s with those parts.
blackened88lx
Active Member
Anywhere from 11.50s to 14.50s depending on who built it and tuned it, how much weight is in it, and who's behind the wheel.
25thmustang
Mustang Master
I agree with the above. Parts are there for 11s, but everything needs to be tuned, running and driven right. Get it running well, get those DRs to hook, and hit some gears and it should go high 11s, easy low 12s.
