belt length for smog delete with underdrives?

[johnny_munyak]

95 Mustang GT:

Am in the process of removing my smog pump and doing my HCI swap. Been doing alot of reading/searching on what belt size to use for removing the smog pump, but I have yet to come across a recommendation of belt length when using underdrives (crank, waterpump, alt) with the smog pump removed. A/C will still be untilized.

Any help is appreciated....

 

[rock4451]

a/c or no a/c

 

[johnny_munyak]

....as it stated above.. "A/C will be utilized."

 

[wytstang]

Mine using ASP pulleys 90.5 (smog by-passed).

 

[revhead347]

Mine was 89.5" belt. If you can't find a belt that is a good fit, you can put a smaller idler pulley on it.

Kurt

 

[Bullitt95]

Smog pump removed, ASP underdrive crank pulley (part no. ASP-523500), and Gates K060868 belt (2215mm) routed like this:

The belt length in the pic (6PK2290) is what I used with the stock crank pulley.

 

[thcapitan08]

I have MAC underdrives and the smog pump deleted and im running an 89.5" belt. its a little long so i would recament the 89'' the 89.5 is about $10 cheaper though

 

[qwikcobra]

Are you guys tensioners resting on the tensionless stop or in the range of motion like stock. I have a vortech which relocates the alternater and tensioner some, it is on the stop but the belt is tight.

 

[sgarrelts01]

What about the length of the belt with a Smog delete an AC delete.

 

[TrueBlue95GT]

What about the length of the belt with a Smog delete an AC delete.

I needed to remove the idler pulley and run a 6PK2025 Belt