gears@plug gap

[JNB0505]

I just bought a 94 gt completly stock and went a little crazy in jegs. I got a msd street fighter coil and accel 8mm wires. Do i need to gap the plugs a little bigger. I also bought accell v power header plugs. Need to know asap if possible almost have the headers on. The next thing is i got jegs 3.73 gears. I got royal puple gear oil went to local dealer and got friction modifier. The chiltons and the hayes manual neither say how to change the gears. If any body could help withsome step by step directions i would greatly appersate it.

 

[The O.G.]

I just bought a 94 gt completly stock and went a little crazy in jegs. I got a msd street fighter coil and accel 8mm wires. Do i need to gap the plugs a little bigger. I also bought accell v power header plugs. Need to know asap if possible almost have the headers on. The next thing is i got jegs 3.73 gears. I got royal puple gear oil went to local dealer and got friction modifier. The chiltons and the hayes manual neither say how to change the gears. If any body could help withsome step by step directions i would greatly appersate it.

Not much of a need for that simple ignition stuff.Stock stuff is plenty good enough.No reason to gap your plugs wider/larger.

 

[94GTCoupe]

google "8.8 gear swap".
you should be able to find the write up.
not on the puter,otherwise i would post up the link.

 

[94GTCoupe]

here you go.

8.8 Axle Gear Install

 

[JNB0505]

thank you guys very much

 

[Black95GTS]

Gap at .054". If you're doing the gears you may as well re-do the clutch packs while everything is in pieces. It's not a job to take lightly, good luck with the install.

Adam

 

[94GTCoupe]

heres what i went with.
if you order from here,wait til the weekend for 10% off.
with the 10% off,it came out to $196 with free shipping.

TRACTION LOK REBUILD KIT 8.8'' - CJ Pony Parts, Inc.

AXLE HOUSING BUSHING KIT 8.8 1985-2004 - CJ Pony Parts, Inc.

8.8 RING & PINION INSTALL KIT INCLUDES CARRIER BEARINGS/RACES & AXLE BEARINGS/SEALS - CJ Pony Parts, Inc.

 

[RIO5.0]

If your going to attempt your own swap I would make sure you have Ford gears. Others may have dimensional differences that are going to make the set-up more complicated...
With Ford gears odds are you'll do ok if you have the tools and some wrenching ability.

 

[DDSTANG94]

I would not try this swap yourself. even If everything seems ok in the beginning you may have problems later