- May 17, 2011
- 21
- 1
- 0
Hey hows it going, Just thought I would fire off a bit of an introduction here..
I recently Picked up my first II off my uncle.
It is a 78 Cobra II
95xxx Orig Km's
Black on tan interior.
Rollbar W/ Door bars.
Ford 9"
Frame is cross tied,
Centerline wheels.
B&m ratchet shifter.
The Origionally was a 4 speed car, but he was building a drag car when he was my age.. and I fully intend to finish his build with his plans in mind..
The motor on the stand for the car is a
Ballanced and blueprinted..
289 HIPO
Keith Black 10(ish):1 pistons
351w heads, shaved/ported/polished.
Solid Lifter setup/roller rockers
Some ungodly huge cam,
and alum intake manifold
and headers
with a C4 Manual valve body tranny and a 3500 stall
The car has been sitting since 1992, with the air care motor in it.. Fired up first try.. I plan on driving the 302 aircare motor that is in it for a while untill i can figure out what to do with the 289 as there was clearly a design flaw made by the machine shop that built it..
I will get some pictures up here soon to share with you all.
I will also try and contain all my questions to this one thread..
I recently Picked up my first II off my uncle.
It is a 78 Cobra II
95xxx Orig Km's
Black on tan interior.
Rollbar W/ Door bars.
Ford 9"
Frame is cross tied,
Centerline wheels.
B&m ratchet shifter.
The Origionally was a 4 speed car, but he was building a drag car when he was my age.. and I fully intend to finish his build with his plans in mind..
The motor on the stand for the car is a
Ballanced and blueprinted..
289 HIPO
Keith Black 10(ish):1 pistons
351w heads, shaved/ported/polished.
Solid Lifter setup/roller rockers
Some ungodly huge cam,
and alum intake manifold
and headers
with a C4 Manual valve body tranny and a 3500 stall
The car has been sitting since 1992, with the air care motor in it.. Fired up first try.. I plan on driving the 302 aircare motor that is in it for a while untill i can figure out what to do with the 289 as there was clearly a design flaw made by the machine shop that built it..
I will get some pictures up here soon to share with you all.
I will also try and contain all my questions to this one thread..