Mods for an 09 mustang v6
- Thread starter jenkins87
- Start date
-
Sponsors (?)
Crackhutch
New Member
- Jun 17, 2012
- 5
- 0
- 1
I put a C&L CAI, Bama Tuner and Flowmaster Force II Cat-Back on mine and it made a huge difference. I went with the Force II (3 Chamber Mufflers) to keep it legal for Germany, which is a maximum of 95 dB, where mine is running at 93.2 dB. All this is around $1200, give or take depending on where you buy it and what deals you can get. Currently I have NGK Iridium Spark Plugs, Taylor plug wires and a Screamin' Demon Coil pack on the way, and eventually I'm going to get a new driveshaft, Corbeau seats, 5 point harnesses and rear seat delete. And for suspension, American Muscle has an Eibach Pro-Sport Suspension kit, which includes shocks/struts, and sway bars for around $900.
That being said, it all depends on what you want out of your V6. If you want to increase the top end speed, you MUST, I repeat, MUST replace the driveshaft because the stock shaft will explode at around 130 mph. If you want better acceleration you can get some rear end gears and a limited slip. If you want overall power you could always go with a supercharger or turbo, though that will cost quite a bit. You can get forged internals and port and polished intake from Super Six Motorsports. Just look around, it all depends on your price range.
That being said, it all depends on what you want out of your V6. If you want to increase the top end speed, you MUST, I repeat, MUST replace the driveshaft because the stock shaft will explode at around 130 mph. If you want better acceleration you can get some rear end gears and a limited slip. If you want overall power you could always go with a supercharger or turbo, though that will cost quite a bit. You can get forged internals and port and polished intake from Super Six Motorsports. Just look around, it all depends on your price range.
Similar threads
