-
It's been a while since my last update ,the weather is finally clearing up .
I bought the hood...
-
I epoxy primed the quarter vent covers, front and back, with two coats .A block sanding and...
-
one thing i forgot to consider while making my covers was when shaping my covers on the English...
-
i was going to use Shelby quarter windows but pricing changed my mind.
i decided to go with...
-
i cleaned up the old suspension and bolted it back in so i could roll it out of my paint booth...
-
i bolted on the front R model valance this morning ,easiest valance i ever installed .it is...
-
been a long hard day.i bet i hand each fender on and off at least 30 times each. a little...
-
i replaced the battery apron some time ago .i tried to fit the pass. side fender :mad:. look the...
-
i bolted the doors ,the trunk lid and the rear valance on today .i need a little readjustment on...
-
i finally got some time for me today .i sanded down every thing but the two front fenders and...
-
well i got the last pieces i was missing for the interior fiberglass. it fit right in place .i...
-
i bolted on the hood hinges and the hood . i had to make the slots in the hinges about 1/8 inch...
-
i picked up the hood late friday. this is really a nice hood ,it's heavy and looks very smooth...
-
i haven't had much time to work on it lately ,been carpeting the house .
had to put down a new...
-
i got it off the rotisserie this morning .it only takes a few minutes with the lift .i just...
-
i sprayed the bed liner today. one gallon did the inside floor,fire wall and the trunk floor ...
-
i picked up the side scoops and i went ahead and picked up an R model valance as well. i...
-
i picked up a 3 inch hole saw . marked the location for the duct ends and cut them out . the...
-
i picked up the brake ducts yesterday. i have to get a new 3 inch hole saw ,i want a nice clean...
-
i got it primerd to day .i love this primer . it is about the stickiest stuff i have ever seen...
-
4 1/2 hours ,doesn't sound like a lot of time but try holding a 2 1/2 inch high pressure hose...
-
i got my sand ,15 bags .that should be enough. 5 gallons of gass for Leroy.
charged up his...
-
my primer made it in to day.seems know one in my area uses red oxide so they don't keep it in...
-
i am still waiting on red oxide primer ,because every thing i order has to take forever to get...
-
this is the last of the welding ,the quarter window holes are filled in .i cut a patch of 18...
-
i just could not stand it ,that dent had to go . i got out my stud welder ,another Harbor...
-
i haven't had much time to work on it , but i did get it sanded down. i was looking at it the...
-
i rolled the lips on the front fenders today. started by getting a 1/8 inch wire cut to length...
-
i dropped the upper a arm mounting holes, 1 inch down and 1/8 inch back for 65-66 . simply one...
-
i rolled the rear wheel lips and tacked them to the inner tubs,they came out nice. then i...
-
i got it on the rotisserie this morning .took the rear end out all by my self ,that sucker is...
-
my parts finally came in . the doors are very nice ,about the straightest i have seen. however...
-
got bored and decided to build the roll bar .made the hoop first ,then the cross bar and the...
-
i made the last two brackets to mount the interior fiberglass. i also attached the roof brace to...
-
the red car went home today so i started on mine again. i made the brackets that mount the rear...
-
the red car is finished. i loaded it in the trailer and it should be going home tonight. i still...
-
i made the patch pieces for the door jamb and welded them in and ground them smooth. they came...
-
i bent all of the inner pieces in the sheet metal brake ,welded the drip trays ends and attached...
-
the out side of old red is finished .i started making the inner pieces. glad i made templates of...
-
i got the quarters and the back window panel welded in place on old red.the roof brace is held...
-
i got the seat devider and the tail panel and the outer wheel tubs in the red one today .you can...
-
i made the last two brackets ,it was easier than i thought it would be. i bolted and screwed all...
-
i have all but the two long brackets made,the ones that look like a Ws tied together .they will...
-
i made some of the brackets that mount the interior fiberglass. the small bracket on the wheel...
-
i assembled the door frames today,trimmed them and welded them in . i think i could do this with...
-
the pass. side is done .i did it the same as the driver side . i had to cut this side a little...
-
i spot welded the rear door posts together and welded on the driver side to the rocker .i used...
-
i started working on the red one today.there is a lot that has to be replaced first .the rear...
-
the floor supports and torque boxes are in. the torque boxes did not fit they were welded...
-
i got the inner structure finished just need to tie the door post to the roof brace on both...