Search results

  1. 98bluevert

    Been searching cant find answer!!!

    98 Mustang GT Stock pump 190lph. I am looking at getting a larger fuel pump for my Zex wet kit 125 shot. I have seen info about the SVT focus fuel pump and it is a drop in. Flows at 255 lph. my questions are: Is it returnless or return because my 98 is return style right? Also what...
  2. 98bluevert

    New pics of my car!!!

  3. 98bluevert

    CF DF clutch and Alum. Flywheel?

    a friend of mine just had a clutch assy. and flywheel put in today. He got in it and loved the way it felt. then noticed it started chattering or something. he thought it might be the weights on it that he noticed since it is different than stock but still kinda worried. anyone have this with...
  4. 98bluevert

    Engine sluggish after long winter indoors.

    OK i got my car out today had to jump it, and ran fine until it warmed up then when it was under a mild load from 2nd gear on up it would be a lil under powered. drove around a lil while longer and noticed when taking off from a stop running it through the gears at WOT about 4,000 rpm it...
  5. 98bluevert

    Help with gauge install...search=nothing

    Ok how do i install a nitrous pressure gauge away from the bootle. i am getting a speed of sound switch panel and am getting it with an opening for a gauge. can i take the zex bottle gauge, the gauge off the base piece then run a line from there to my center console. any help would be great.
  6. 98bluevert

    tuner question

    don't know if anyone can help but if you can please do. Anyone with a 96-98 GT that has PI cams and PI intake. When tuning with a handheld should i add more fuel because of the increase in airflow and if so what rpm range and how much. would like to wait to get it dynoed until i am done...
  7. 98bluevert

    most lift for a cam.

    ok did a search, don't know if i enter something wrong but couldnt find the answer. could someone answer this for me or send me in the right direction plz. What is the most lift you can get out of a cam for a non-pi motor with non-pi heads. most lift with non-pi motor and PI stage 2 ported...
  8. 98bluevert

    D/S ???

    Does anyone know if an aluminum driveshaft out of a fox will fit a 96-04 gt. Someone told me all you have to do is change yokes and your good to go.
  9. 98bluevert

    Parts Question

    Application: Ford 8.8, Standard rotation, Rear differentials, (Requires notched cross pin, $31.99) Requires notched cross pin??? for a 4.56 rear gear. has anyone heard of this.
  10. 98bluevert

    Rear End Problem???

    What are the chances of of a ring bolt shearing off or backing out. took it into the shop today and they said one bolt was completely missing(ground up probably) 2 where out just floating around and a couple others where backing out. Its been 4 years but only 15,500 miles since my 4.10 was...
  11. 98bluevert

    Need help after replacing pushrods.

    After i replaced the pushrods and put everything back together, the engine turns over and doesn't start. any ideas. strong gas smell from exhaust, if i push on the throttle it acts like it wants to start, but doesn't.
  12. 98bluevert

    need help with a part!!!

    Ok i was putting the intake on my car the other night and i got mad and moved the egr tube out of the way by slightly bending it, when i did so i noticed something behind it snapped off and i just want to know what it is, does and how much for a new one.
  13. 98bluevert

    Pi intake swap numbers?

    Ok i was wounder what the swap numbers are under the curve for a npi intake to a pi intake. i know its like 17 peak rwhp. but does anyone have a dyno graph or just numbers all the way through the curve for the difference? Also what about those adapter plates i have read about. peak to peak...
  14. 98bluevert

    Who would Win???

    OK a friend of mine and I were talking the other night about racing. He has a 99 coupe with 3.73, BBK CAI, Salleen Pulley's, Diablo Chip(custom order mail). I have a 98 vert 4.10's, TFS elbow (free) :D , PI intake, PI cams, March Underdrive Pulleys, Mac Prochamber, MM full length SFC. Now...
  15. 98bluevert

    What size hole???

    I am putting on a PI intake with alluminum crossover on a 98 GT and need to know what size hole to drill for the second sensor
  16. 98bluevert

    Rear end help.

    Whats the easiest way to get the S-clip out of a 8.8 rear.
  17. 98bluevert

    Can someone tell me if I did this right?

    OK first time swapping cams and wanted to know if i timed them right. Where should the timing chain marks on the crank pulley be if it is at tdc?? Left camgear Right cam gear
  18. 98bluevert

    Need a little HELP with Timing

    Ok so i have a 98 GT that i was replacing the cams in and i was using the Anderson Tool to do it but my friend that was holding it let it drop and i think the chain has now skiped a tooth. how do i go about degreeing the cams? I have rotated the engine by hand but it stops a little was...
  19. 98bluevert

    pi intake and cam swap

    ok i'm tired of searching on here. I'm getting ready to do the swap. I know it is suppose to add 30ish rwhp. What about tq numbers. Do i need a tune or can it wait till after i headers, and a couple other things? Also what should i run a the track: 98 Vert, 4.10's, MM subframes, Mac...
  20. 98bluevert

    A little problem in the rear.

    Alright, who know's about rearends because i don't know jack squat about them and i have a problem, Sounds like a loud clunk or popping noise when going from reverse to 1st or vise versa. kinda like a u joint going out. so i jack up the car, dropped the driveshaft, had the e-brake on and...
Top Bottom
Back
Forums
Menu