Search results

  1. millhouse

    High Oil Pressure And Temperature Gauge

    I just picked up a 95 GT Vert that is displaying odd gauge behavior. When cold, the temperature gauge reads normal and the oil pressure gauge reads high (L on the gauge). After warmed up, the temperature fluctuates (over a period of a few seconds) from A to fully pegged and the oil pressure...
  2. millhouse

    Deal or No? 89 Vert with h/c/i

    I have the opportunity to pick up a 89 convertible with the following mods for what seams like pretty cheap. The motor has not been broken in yet. It has brand to TFS heads/cam/intake. Inside is forged flat top pistons/rods. The following are all brand new: Throttle body, alternator, PS...
  3. millhouse

    FS: Oil Filter relocator

    This is a stock oil filter relocator as seen on the Ford Explorers. This fit's the stock 5.0 block however and can be used for the mustang. $15 + Shipping
  4. millhouse

    For Sale: 8 19lb Injectors

    These are the newer style injectors with the older style connectors. They have a better spray pattern than the stock 5.0 mustang injectors yet are a direct swap. These have approx. 60k miles on them. $40 + Shipping
  5. millhouse

    FS: Stock Roller Lifters, Spider and Dogbones

    All for $60 plus shipping.
  6. millhouse

    One Pair Mach 460 Amps

    Edit: I just have one now. $35 + Shipping takes it.
  7. millhouse

    Replacement Door Cup not true black

    I picked up a new drivers side replacement door cup as the old on has broken clips and found it is not a true black, but more of a dark textured grey. It just doesn't look right with the blacked out interior. What is the proper way to fix this (die, paint etc.?)?
  8. millhouse

    Smoked Healights...Silverstars vs. HID?

    Smoked Headlights...Silverstars vs. HID? Let me say that I have in the past felt fairly strongly against throwing HID's in a non-projector housing...however, I have a strong concern for my current lighting situation. The 97 cobra I recently traded for has smoked headlights and while they are...
  9. millhouse

    Stock K-Member Alignment Issue

    I recently purchased my 97 Cobra from an individual who had the engine replaced/rebuilt. The shop that did the work apparently dropped the k-member down, but when they re-installed everything it seems to be crooked. The drivers side front wheel is closer to the back of the fender well than the...
  10. millhouse

    Metra harness and mach 460?

    I believe I have found out why my car's sounds system sounds like ass. It appears the previous owner bypassed the factory amps and ran new wires from the new head unit to all of the speakers. The sound is rather "tinny" with a complete lack of deep bass and distortion at higher volumes. My...
  11. millhouse

    Metra harness and mach 460?

    I believe I have found out why my car's sounds system sounds like ass. It appears the previous owner bypassed the factory amps and ran new wires from the new head unit to all of the speakers. The sound is rather "tinny" with a complete lack of deep bass and distortion at higher volumes. My...
  12. millhouse

    Mach stereo with aftermarket head unit, no bass...

    I just picked up a 97 cobra convertible (actually traded my TT 5.0 fox for it) and noticed the surprisingly lack of bass from the system. Now, while I'm not intimately familiar with the mach setups…I was expecting more from the bass department. The previous owner recently installed a newer sony...
  13. millhouse

    Mach stereo with aftermarket head unit, no bass...

    I just picked up a 97 cobra convertible (actually traded my TT 5.0 fox for it) and noticed the surprisingly lack of bass from the system. Now, while I'm not intimately familiar with the mach setups…I was expecting more from the bass department. The previous owner recently installed a newer...
  14. millhouse

    She's gone!

    Today is a monumental day indeed. I've had her for nearly 8 years now and finally broke down and traded her for a 97 Laser Red Cobra Convertible. Of course, on the way back some tool in a new GT passed me with the license plate "Get Some"....DOH!!!!!
  15. millhouse

    96-98 Cobra VS 99-04 GT's Looking to buy

    Ok, so the time has come to revert back to something a bit more daily driver-ish. In my price range (< $6500) I have found quite a few 96-98 Cobra's and a few 99-04 GT's. While I love the 4v cobra engine as well as cobra styling, I like the new edge look as well. Could you guys list some...
  16. millhouse

    89 Twin Turbo Mustang (Notch/Coupe)

    Lets see...where to start. Well, up for sale is my 1989 notchback mustang. First things first, the body is not mint. This is a northern car with all sorts of dings, dents and yes...even some rust. With that said, all of the drive-train has been updated. The engine was rebuilt in 2007. The engine...
  17. millhouse

    MSNS-E (high_res) with ls2 COP's

    Some of you may have already seen my post on this over at turbomustangs...but I figured I'd still post it here for those who don't venture there. Here is what I've found to be the new "easiest" method to get the board up to par. To start off, if you have done the TFI mod to the...
  18. millhouse

    Sources for blowers/fans for exhaust venting

    I'm curious if anyone knows of any sources for blowers/fans that come in existing equipment/appliances. I'm looking for free sources on craigslist. The only thing that comes to mind is a furnace or perhaps a dryer. What other sources can be had? Squirrel cage style fans would be preferable...
  19. millhouse

    Let's see your garage thread!

    Here's Mine. I've been here over 2 years now and am slowly acquiring equipment. My latest addition is a 3.5 ton Arcan jack from Costco preceded by a 25' 100k BTU Tube and my first air compressor. Hopefully within the next 5 years I'll be able to swing some type of lift be it scissor or...
  20. millhouse

    Reverse Light wiring (T5 to AOD harness)

    I'm doing a 4r70w swap that was previously done in an AOD equipped car. Now, the pigtail on the chassis harness is the same connector for both the T-5 and AOD...but the pin outs seem to be different. When connecting my conversion wiring harness from the baumann TCS (made for an AOD equipped...
Top Bottom
Back
Forums
Menu