Search results

  1. S

    1967 Mustang Fastback for sale

    Baby on the way = need a more family friendly car :( So I turn to you gentlemen, as I would rather see this car taken care of properly and not lowered to the ground / a huge spoiler put on the back! It's a 67 Fastback C code with original 289 V8 motor and C4 transmission. Deluxe interior...
  2. S

    1967 C code fastback sadly for sale

    Baby on the way = need a more family friendly car :( So I turn to you gentlemen, as I would rather see this car taken care of properly and not lowered to the ground / a huge spoiler put on the back! It's a 67 Fastback C code with original motor and C4 transmission. Deluxe interior (polished...
  3. S

    1967 289 edelbrock carb throttle install?

    Installed my new carb and intake but cannot figure out how to install the throttle! All of the literature that I can find is for a 68 and on that uses a cable for the throttle- can somebody shed some light here for me?
  4. S

    EGR on stock 67 289?

    Replacing my intake + carb and noticed what looks like a vacuum line running from passenger side valve cover to a spacer between my carb and intake. I am assuming this is an EGR but can't figure out why / if this should even be here? Wouldn't this simply be heating up the air / fuel going...
  5. S

    power steering to manual

    power steering to manual question in process of removing the old power system and need help with removal! how do i get the power steering cylinder (ram) off?? BFH? The cotter pin and nut is removed, as are the lines but I cannot get the ram itself off!! Also - is there any special trick to...
  6. S

    Power Steering Drop HELP!!!

    So I started installing my new tri-ys today and went to install the power steering drop and must have stared at it for 15 - 20 minutes drawing a blank! Talk about a brain fart! Can anybody show me / tell me where this stupid thing goes / works?!?!!? Also any tips for installing the headers is...
  7. S

    Probably a silly question

    Probably a silly question...but I am always nervous about working on my wifes 2001 GT. I am trying to replace her fog bulbs but can't figure out how to get at them. I only see one screw and that is the adjustment screw. To the covers just pop off?
  8. S

    Cold Weather = Wont Start?

    Problem has been getting worse as it gets colder. Used to be a rough start (crank, almost die, then idle like normal) now it wont idle at all! Cranks and immediately dies. I can manually give it gas and it will run as long as I give it gas, but as soon as I let off the idle drops and she dies. I...
  9. S

    Engine Acting Up

    Friend has offered to give me a mid-60's 427 out of his car before it gets "totalled out" (despite damage being minimal). Took a drive in the car, and engine runs smooth until going uphill or giving it some gas. It sounds like it is pinging but then studders and learches and the exhaust note...
  10. S

    Starting Frustration

    Good morning everybody, Two mornings ago I went out to the car, took the cover off, put the key in and turned to the roar of silence. No clicking, no turning over, nothing. Turn the key back to the off position and hear a click coming from the engine bay. I go pop the hood and pull the positive...
  11. S

    Exhaust Questions

    Hey Everybody- Finally decided to upgrade out of the stock single exhaust and am looking at my options. I noticed that there is a header set (I think by MAC?) that doesnt require a power steering drop- anybody tried these or have any opinions? Would prefer to avoid have to bother with it- Also...
  12. S

    Suspension Frustrations

    Hey everybody, I have been really getting frustrated with my 67 fastback and before I go crazy, I thought Id post the situation and see what the experts think. When I got her, the front and rear springs were shot and rubbing on corners. Replaced both (620's up front and 4 1/2 Mids rear) and...
  13. S

    Butyl Window Sealer?

    Anybody know of a good place that I can order the correct sealant for putting on new weatherstripping? All of the usual places either have window-weld or an unknown/generic sealant and I would like to make sure that I use the correct stuff. Thanks!
  14. S

    front carb inlet

    this is probably a really dumb question that I will figure out 10 minutes after posting but oh well :shrug: I current have the stock autolite 2v on and am seriously considering swapping new intake/carb but noticed that the carbs I was looking at both have side or back fuel inlets. Is there a...
  15. S

    Parking Brake Adjustment?

    Hey everybody, I just replaced the parking brake cable, but have noticed now that I have to pull the brake almost all the way back before it even starts to tighten down. Is there anyway to adjust this? Right now it just seems like I run out of brake lever before the brake gets good and tight-
  16. S

    Hood Grill Inserts???

    Recently I noticed that the inserts (that hold that turn signal indicators) on my hood are missing some of the pieces that hold it on. Does anybody know how I can repair this/ replaces these without replacing the whole hood?
Top Bottom
Back
Forums
Menu