Search results

  1. T

    Fuel Sn95 Mustangs Sitting And Fuel Pump Death ?

    I have a '99 Mustang GT that I've owned since new (124K on the clock). I have it sitting in a garage now, with 1/4 tank of "fuel". If you can call the "fuel" sold nowadays as fuel rather than "corn likker". But I digress. While researching several DTC codes (mostly my fault), I noticed many...
  2. T

    Dorman replacement PI intake manifold comments ?

    I thought I was the last remaining owner w/o an intake manifold cracking. Well, I just installed a Dorman replacement PI manifold, and have a huge vacuum leak. The Dorman manifold had "cone" shaped holes for the fuel injectors. The stock manifold has a circular , "machined" surface for the...
  3. T

    Dorman replacement PI intake manifold comments ?

    I thought I was the last remaining owner w/o an intake manifold cracking. Well, I just installed a Dorman replacement PI manifold, and have a huge vacuum leak. The Dorman manifold had "cone" shaped holes for the fuel injectors. The stock manifold has a circular , "machined" surface for the...
  4. T

    Part ID

    Can any of you guys identify this part ? Car is a 1993 2.3l Mustang LX. No idea how this "came loose either. Thanks in advance !!
  5. T

    12 year old vacuum lines - 99 GT

    There's 8 pages of threads about vacuum here on Stangnet, but I can't find any that mention a source for new lines. I asked the parts counterman at Ford once, and he said they don't stock them. Some of the vacuum lines on my '99 GT look "specialized", and I don't want to put any generic...
  6. T

    GEM controller question

    I ordered a GEM controller/electronics box through a salvage yard (due to electrical probs with dome/trunk lights, etc). Does the GEM have anything to do with keyless entry/key/theft protection ? Thanks in advance !!
  7. T

    HELP ! - Window regulator question

    I got my new window regulator yesterday. I just took out the old regulator, and unbolted the motor. I noticed that on the new regulator there are no threaded "inserts" for the motor mounting bolts. Please see pic. Where can I get some ? Or should I have gotten them with the new regulator ? Thanks.
  8. T

    Looking for a short

    I know this thread is about as exciting as a Chinese truck, but : My dome light is inoperable, and the fuse blows as soon as I install it. So, I have a short. I pulled the door panel, and looked at the little door switch, and the wires still had their cladding , and no shorts to sheet metal...
  9. T

    Mach460 illumination

    Well, several of the controls on my 10year-old Mach460 head unit no longer light up. I figured out how to yank the head unit out with those special "U" shaped tools, but am puzzled how to get to the bulbs so I can replace them.:shrug: Has anybody in this forum replaced the bulbs ? I tried...
  10. T

    Brake Job from Hades - The Finale

    Did I mention this site rocks and has some great info in the archives ? I already finished my front brakes (and had some help from this forum, thanks !) Today I replaced both sets of rear pads, and both rotors (one resurfaced actually, and one brand new from Autozone). Anyway a search...
  11. T

    Lessons Learned - '99 GT "EZ" Pad relacement

    A few lessons learned while doing the front brake pads on my 99 Mustang GT 107K !: 1. This year's GT has PBR dual piston front calipers. I really had to compress the pistons to clear the new pads (Motorcraft pads). This may have caused one of the caliper pistons to hang up, causing the pads to...
  12. T

    Secret Incantations for GT front brakes ?

    The situation : 99 Mustang GT - all stock, installed Motorcraft pads on front wheels. All components clean, no leaks seen at the caliper pistons or boots , slider pins greased with very expensive caliper grease, caliper bolts torqued to specifications. Yet, the driver's side caliper still...
  13. T

    Important - bolts for rear caliper brackets

    Are the bolts for the rear caliper brackets reusable or not ? Thanks for any replies !!
  14. T

    16K on Dunlop Ap A2 's ??

    This is ridiculous. I have 16K on a set of warranty replacement Dunlop SP A2's. I rotate the tires, and keep the pressure dialed in, yet they are wearing like they are made of licorice. The tires are warranted for 50K miles ! After I bring these back , they will still find a way to run...
  15. T

    MSD Blaster Coil on Plugs - feedback

    Just curious if anyone has tried these out yet - MSD Blaster COPs. They are $ 400 a set so...
  16. T

    Technical Comment on Spark Plugs

    I just changed my Autolite Platinum spark plugs (over 50k on them) for some Autolite 764 (copper cores). I immediately felt a difference in idle quality and acceleration. I changed the original platinum plugs at about 50k, but didn't notice (or don't remember) a difference then. I don't know...
  17. T

    Stangnet Load times

    Lately, the loading time for these Stangnet forums are atrocious. And, I am on a fast broadband connection. I know this site operates on ad revenue , but the crap delays I get from "burstnet", and "google analytics" and others, suck. How about fixing this issue ?
  18. T

    Turn Signal Flasher Location ? 99GT

    My Haynes manual covers 94-2000, but shows the wrong fuse panel, etc. Where is the turn signal flasher located on a 99GT ? My turn signals and hazards are inoperable.Thanks for the help !
  19. T

    Early Prod. 99 GT - tensioner question

    Looks as if I can't slip the serpentine belt off the pulleys after I rotate the tensioner clockwise. I figured out that the bracket need to come off first, but how does the belt get past the tensioner "arm" This is a 99 GT - production date January '99 . You guys with the later production...
  20. T

    NE1 Else running Dunlop Sport A2's

    Was wondering what kind of tread wear you other guys are getting ? I bought these 15K miles ago , and the tire guy is telling me I have 5K of tread wear left. These tires have a 50K warranty !!! (and I thought the dunlop 5000's were soft) Thanks !
Top Bottom
Back
Forums
Menu