Search results

  1. 0

    Fuel pressure?

    I just put in a new holley 255lph high pressure pump, aeromotive adj fpr and a mech. fuel press. gauge. When my car is running at idle my fp is at 24psi no matter how i turn the screw on the adj fpr, when i rev it drops to about 22psi. Doesnt this sound pretty friggin low or is it normal? What...
  2. 0

    331 or 408

    I have a 331 stroker kit but havent started any machine work or anything on it right now its just parts in the shop. Everyone keeps trying to talk me into a 408, the shop will give me credit and get the equivilant but 408 parts if i want. The 331 or 408 shortblock will cost me the same but I...
  3. 0

    Injector and maf help please

    Im looking for a set of 30lb injecotrs but found stock LS1's have 28's, i can buy them dirt cheap but didnt know what i would do about a maf. Would i just get a maf for 30's and be ok what would have to be done or would it just not work? Do you have to have 19,24,30 etc. sized injectors on...
  4. 0

    How bad will 30's kill me n/a?

    Im stepping up my dry kit to push alot of nitrous and need to use 30lb injectors. My question is how bad will they effect my normal driving and n/a performance? Mods are in my sig except i will also be adding a 75mm tb and egr, 76mm maf for 30's and a 255fuel pump so ill still be on stock heads...
  5. 0

    Cheapest way to drop .2 tenths?

    I ran a 12.16 @113.47 today on drag radials with a 1.71 60'. Im looking for the cheapest way too add power to drop 2 tenths, i want to run an 11 on drag radials consistently which relies on driving mostly i know but a lil more power never hurts. Im still on the stock tb, stock maf, stock heads...
  6. 0

    NOS dry kit install problem

    I am having trouble with my dry kit. When i open the valve on the bottle the nitrous runs right into the vacuum line and fp regulator. When i hit the button nitrous will come out of the single nozzle but anytime the valve is open nitrous is going thru my vacuum tree and into my fp regulator...
  7. 0

    Still hot start problems

    I put in a new coil, tried a new dist. w/ tfi and still having problems. Once the cars gets hot it wont restart without giving it gas and then it will sputter for a second then a second or 2 later the rest will fire and its fine. When cold it starts its fires right up with no throttle like a...
  8. 0

    Explorer 65mm tb?

    I remember seeing an article showing how to make an exploror 65mm tb work on a fox. I am gonna try it but what year should i ask for? Also would i see much gain if any over the stock tb. I want to see how fast i can get it to go n/a with stock heads but since im putting together a 331 im not...
  9. 0

    Dies when rpms come down

    My car will idle just fine but if you rev it and let the rpms come down then the car will just die instead of dropping to idle speed. When i slow for a stop or turn and put the clutch or go to netural the car dies. It idles around 720rpms, i just swapped on a different iab and tps and nothing...
  10. 0

    Hot start trouble

    My car fires right up when its cold but after a drive or idling awhile it will just crank untill either the battery goes dead or i might get lucky and it will crank untill i get it to spit and sputter for a second before it completly fires all 8 cyl.. What causes this? The car has no trouble...
  11. 0

    Which wire is coil ground?

    Hooking up my tach and cant tell which wire is the ground on the stock coil.
  12. 0

    Dash lights wont come on

    I got it running and everything now but at night time when i turn on my parking lights my dashhlights wont come on, also for some reason the turn signals lights on the dash are on all the time but blink when i use the signal and the highbeam is on unless i use the highbeams and it goes off...
  13. 0

    Manual brake conversion

    How much will it effect braking and how much weight will i drop. Im cleaning up my engine bay and dropping all the weight i can.
  14. 0

    Could it be bad fuel?

    My car sat for over a year with the same untouched 87 octane fuel. What are the effects of fuel sitting this long. The timing seems like its too advanced at even 10* or playing around a lil without a timing light, it will put out a cloud of white smoke if you rev it is that typical of bad fuel...
  15. 0

    Cam swap, idle help

    What do i do to get my car to idle stable but low so you can hear the cam lope. I put in a Bcam when i did the swap, right now timing is at 10* and cam is straight up if it matters much i havent gotten to drive it and find the right timing yet but i can do that im worried about what do i mess...
  16. 0

    Starter problem

    The car has power the lights/radio work but the car wont crank. What all hooks to the stock starter is there only one wire and its the positive cable from the opposite post of the battery on the relay? Does the starter have its own ground im missing?
  17. 0

    02, signal wire

    Im doing wiring and ready to wire up my a/f gauge. Which wire is the signal wire from the 02 sensor i didnt look really close at them but theres 2 whire wires and a black im assuming the black is the ground so that leaves the power heater wire and the signal.
  18. 0

    Hatch wont open

    I put on my saleen spoiler and put everything back together shut the hatch now it wont open. If you turn the ket there is no positive click and the release it just makes a 180* turn. How can i pop it open from inside the car? Im working on relocating my battery and need it open quick to finish...
  19. 0

    5spd swap question

    Im getting close to trying to fire my car after my 2.3 auto- 5.0 5spd swap. Im all finished w/ the pedals, clutch cable. I dont have the 2 plugs for the T5, what are they and will my car start without them. The pedal assembly had a couple plugs too but their all empty. I am thinking its a...
  20. 0

    Help fitting Harwood 6" lift off hood

    I got the hood and not sure how much i need to trim off and what to cut it with. Also any tips on installing the fasteners and is there specific spots for them? The hood came w/ no instructions besides they roll the edges for shipping safety.
Top Bottom
Back
Forums
Menu