Search results

  1. slo65

    new best in the 1/8th tonight

    i'm happy as a pig in ****! for a long time i was stuck in the 8.70's (1/8th mile) but tonight was a good night, nice and cold, i brought some ice for the intake previous best 8.70 @ 78. something w/ 1.82 60 foot best tonight, 1.74 60' 8.60 @ 78.9 mph! i'm soo pumped, the guy...
  2. slo65

    some advice on where to go from here....

    welp, i'll start off with the car 88Gt, pullies, bbk shortys, catted h pipe, flowmasters, king cobra clutch, mgw shifter, 3.73 gears my best with that stuff was a 8.70 in the 1/8th (et streets) more recently, explorer intake installed, along with full length sfc's and lca's went to...
  3. slo65

    explorer intake installed, now problems

    ok i have a 88 Gt speed density, installed the explorer upper/lower today, now besides the lack of power (i suspect timing) there's a problem with charging, usually cruising on the freeway/around town it'd be about 13 (volts?) now it's right around 10 at all times, at idle around 8.... why would...
  4. slo65

    so car over heated, i need help asap

    ok guys, on my way to cal mustang to ironically buy stuff for the pony, noticed the temp guage went up fast (never happened before) so pulled into a gas station, i could smell coolant :( popped the hood, steam everywhere, all i know is it was bubbling from the water pump, not sure where the...
  5. slo65

    so track lock went, where should i go from here?

    ok well best time is in my sig, went again tonight this time with subframe connectors, lookin for a high 1.7, didnt happen, instead my track lock went, i knew it would happen, just didnt think it'd happen tonight :( , anywho i'm 18, work a low paying job, about to start school soon, wonder what...
  6. slo65

    ran at the track again, results inside

    well this was my third time to the track i believe on the mickey thompson et street radials, i'm sure donny (superslothguy) will chime in, as we went heads up about 10 times :D best run of the night was 1.83 60' 8.70 1/8th 78.66mph also had a 1.82 60' 8.75 1/8th 78.74mph...
  7. slo65

    new best track times, where to go from here?

    ok basically car's a 88Gt, i have a k&n, fms pullies, full exhaust (shortys, 2.5" catted h, flows), mgw, 3.73 gears, and mickey thompson et street radial tires :hail2: last time my best was a 8.9 with a 1.89 60' tonight i ran a .599 1.821 60' 8.772 1/8th @ 78.21 the weather was...
  8. slo65

    ran at the track tonight, first time with new tires, comments welcome

    first time with my m/t et street "radials" "mods" electric fan k&n fms pullies bbk shortys 2.5" h pipe *catted* flowmaster mufflers mgw shifter tire psi was at about 15, i need some practice on the burnouts, didnt help that the water box guy didnt keep it wet :mad:, basically i'd...
  9. slo65

    going to the track with real tires for the first time

    well guys as u can see in my sig the last time i pulled a 9.0 (1/8th) with a 2.0 60' on crappy remington street tires @ 30psi, i recently got some 10 holes from a friend (thanks don) and put some 235/60/15 et street radials, i have 3.73 gears, just looking for some people who have ran on these...
  10. slo65

    mech. oil psi guage "chatter"

    well as i'm sure some of you have had, i bought a mech oil psi gauge to see whats really going on, kinda like the look so i left it in the car so went to the track (this was a long time ago) guys said he'd let me slide but i need to put in the copper line, so i went ahead and put it in...
  11. slo65

    rolling forward in staging lanes, why?

    well guys the first couple times i went to the track i would roll through the water box, and just spin em to get the water off (street tires), i would pre stage, put the clutch to the floor, in 1st gear, let off the brake.... and i'd roll forward :nonono: so i would have to pull the e brake...
  12. slo65

    ok just ran codes for the first time

    one quick question, it says while performing the koeo scan with a "4.9 standard transmission press and hold clutch in until all codes are sent" i have a 5.0.... does this apply to me? (<kind of a dumb question i know :rolleyes: ) now that that's out of the way code 63 : throttle position...
  13. slo65

    just bought a code scanner...

    ok i went through the manual and it says that the timing has to be set before u should perform the koer test, does that mean stock timing? mine was at 14* but was recently kinda screwed up, not sure what it's at now but it doesnt ping on 91, would that make much of a difference in the test...
  14. slo65

    do my times sound slow for my car?

    i posted this the night i ran, but i didnt get too many responses, i was wondering for what my car is, are my times slow? i ran a 9.4 @ 77mph (1/8th) .510 reaction time, 2.2 60 foot, i know the 60 foot could come down to a 2.0 and the times would drop but besides that what else could i do? my...
  15. slo65

    1st time to track with new gears..

    first off sorry if this doesnt belong in tech, 1st time to the track with my 3.73's 2nd time to track ever, my best run on stock gears was 9.7 @ 76 mph, this time with the 3.73's it was 9.4 @ 77, i know there's more in the car but i couldnt get the 60 foot down too far, my first 60 foot was...
  16. slo65

    think ima get on the bottle

    hey guys couple quick questions, i've done the search but didnt find much, my 88gt has a 95 motor (non forged pistons) i'm wondering what kinda shot i could run safely? also i know u have the retard the timing and get a bigger fuel pump, anything else i'd need? maybe dr's and a fuel pressure...
  17. slo65

    irwindale speedwayyyy

    hey guys i went once already, since then i got my gears in and i'm going back on the 2nd, any of you guys go there? if anybody plans on goin on the 2nd pm me, it'll be goodtimes :flag:
  18. slo65

    quick question about a edelbrock performer

    guy wants to sell it to me for 300, good condition, would it be worth it to run it on my car? i'm not expecting some magical gains but how would it run with the eddy and say a 65 or 70mm throttle body? or would that be overkill for the stock heads/cam (keep in mind car is a sd) thanks :flag:
  19. slo65

    blahlkdjaflkjf

    <img src = ""> :D
  20. slo65

    blahlkdjaflkjf

    <img src = "http://img.photobucket.com/albums/v138/xscrumptiousx/post-65998-1097198946.gif">
Top Bottom
Back
Forums
Menu