Search results

  1. Mustangless

    Roush Need help finding a wheel

    I need one 18x10 silver 94-98 italian saleen wheel for the rear. I can not find someone selling one anywhere on the internet. I would be willing to buy 2 rears if thats the only way to get them. I just need someone to point me in a direction to find one. Thanks
  2. Mustangless

    lean off rev limit?

    EECTuning.org • View topic - going lean during burnout I posted that there, but figured I can get more help here too. When doing a burnout my lambse will be 11.44 and my afr low 11s. Then my afr will spike to 20+ and my lambse will go to 16.1. The log in the link shows this. My...
  3. Mustangless

    lifting heads

    I have been running 8lbs for a while now. It will not get me to my goals of 11s, so I was thinking about trying more boost. 12lbs is probably as high I will take it. If that does not get me there, I will just be happy with 12s. I have stock head gaskets and stock bolts (valve covers never...
  4. Mustangless

    How is your boost gauge hooked up?

    I have an autometer gauge with the nylon T-d to the back of the intake. The fitting (see pic) that goes from the nylon to the T is rotted and cracked. It leaks air and is only 3 years old or so. Talking about the black piece by the brass fitting and T
  5. Mustangless

    optima battery dead

    I don't know the exact time I have had this battery, but it has not been too long. If the car sits for more than one day it will not start without a charge. It has been doing this for 5+ months. Then the other day it would not start right after driving. Got jumped off and drove around for...
  6. Mustangless

    smoke on gear change

    Went to the track and noticed something new. The car has developed some smoke on each gear change (1-2, 2-3). I know its not rich (afr stays 11.7-12.0) and it looks more whitish anyways. I also had a breather on in place of the oil cap. Here is the video Don't pay attention to the pegleg...
  7. Mustangless

    ecu ground

    where is this located at? on the engine block?
  8. Mustangless

    stock log

    Does anyone have a log file with spark, rpm, mph, and load? the reason I am looking for this is trying to get a good idea of spark. I looked at a log from I was stock and was hitting 49, but did not log load. I only see 43 now, and I am running 93 vs 87 back then
  9. Mustangless

    high idle

    I was having a high idle problem, and found out my iac did not work. Got it replaced and I still have a idle problem. When the car is not in gear, it is idling around 1100. When I put it in gear, it will go down to 900. I don't think I have an vacuum leaks. The iac was working when it was...
  10. Mustangless

    what is this

    I borrowed this picture from somebody on corral.net That red line that is just sitting there, mine is like that too. What does that go to and could that be a vacuum leak? edit: Ignore the drawings. He is having a noise he is trying to figure out.
  11. Mustangless

    boost and pcv

    I was thinking about using this setup but, I don't want the line running from the oil cap to the "inlet side of the blower". I am using a blow through setup, so whatever gets pass the oil separator would get on my maf. I thought about using a breather on the VC, but then I would have a...
  12. Mustangless

    more spark

    Has anyone ever adjusted their spark tables up 1-6? Currently my spark tables are about the same as the u4p0, except for the higher load/rpms. People adjust their distributors from 10* to anywhere between 11-16*. Since I am using 93 octane isn't it just a waste of higher octane gas not...
  13. Mustangless

    rev limiter

    If the rev limiter is set on 5700, and you hit 5700 does that just take fuel away? That sounds dangerous. If so, is there a way to just make it go to 0 spark?
  14. Mustangless

    dies won't start, and missing

    A few days ago I was coming to a stop and the car just died. Then it took me atleast 5 minutes to get it started. It would crank, but would not start. Finally I got it started and it did okay. When I am going from 2.5-3k rpms I have a slight miss. For example the engine will go...
  15. Mustangless

    on going tune

    Been working on my tune more and more. I have the CL tune close to what I would consider good. Here is a data log of just a normal drive. I don't know why, but it looks like my kams were just reset too. :shrug: They usually stay between .96-1.05. CL log Now for the problem. Went to...
  16. Mustangless

    show your overflow tank

    What is everyone using for an after market overflow/catch can? I have read that you can use the windshield washer fluid holder, but I still want to keep that. I just want something smaller, that mounts in the same location
  17. Mustangless

    converter needs to be restalled?

    I got my torque converter when my car was stock. It did good, with little slip (4-6%). Now I have started to notice that it is slipping more. The car used to be at 7psi, but yesterday it was more like 9psi and the slip was bad. Around 5k, I am calculating about 15% slip. I might not even...
  18. Mustangless

    lambse, kams... rich?

    Got a little datalogging with BE and now have a few questions. Most of the entire log the kams were .99x-.83x (rich?.) My lambse was anywhere from 12.x-18.x. Does 1 or 0 is CL? edit: looks like 1 = CL. I only saw that for a few seconds Does this mean I am running rich? My wideband is...
  19. Mustangless

    will these work on stock headers

    Gasket or is it the bigger portsBig port
  20. Mustangless

    Sway bar question

    My "exhaust" is only an inch or so away from my front sway bar. Do I need to worry about the sway bar hitting the exhaust? How much does the sway bar move? How can I lower the bar if it needs to be fixed?
Top Bottom
Back
Forums
Menu