Search results

  1. ALMOSTFINISHED

    1988 Ford Mustang GT

    Hey everyone, I'm relisting the car at a new price which is negotiable. NEED to sell I am moving and starting a family! I'm selling my 1988 Mustang GT. Has power locks, power mirrors, cruise control and manual windows. Windows are tinted 35%. Its in very good condition and I have done quite a...
  2. ALMOSTFINISHED

    1988 Mustang GT for sale

    I'm selling my 1988 Mustang GT. Has power locks, power mirrors, cruise control and manual windows. Windows are tinted 35%. Its in very good condition and I have done quite a few modifications to it. As follows.. -Trick flow twisted wedge heads with upgraded valve springs. 500 miles...
  3. ALMOSTFINISHED

    Summit racing SFI balancer

    I bought the summit racing version of the sfi harmonic balancer for my car. Everything looks great but the spacers they provided to get the proper crank pulley alignment suck, it has a little wobble to it, the balancer is dead balls straight, its the spacer. Does anyone know where I can get a...
  4. ALMOSTFINISHED

    Head stud Question

    I just finished my h/c/i install using arp head studs. I cleaned the heads along with the deck to near mirror finish, then put sealer on the lower head studs, installed them snug as told, then torqued the heads down in sequence and steps stopping at 85 lbs. Finished the car up today, filled it...
  5. ALMOSTFINISHED

    Stripped header bolt threads on TW's

    I have brand new twisted wedge heads and new bbk long tubes that I'm installing. One of the header bolt threads on the head is stripped, it wont tighten more then hand tight. They are brand new so it wasn't me... :rolleyes: Is there a way I can tap the threads and get a larger thread size bolt...
  6. ALMOSTFINISHED

    BBK Long tube clearance problems

    I bought a set of bbk long tubes from summit. They went in with no problem but while I was doing the swap I saw my motor mounts were shat so I just installed poly's. Now everything is back in and the engine is level so I go to install the steering shaft-I'd have to dent the header tube in about...
  7. ALMOSTFINISHED

    injector and timing seal ???

    1.Used injectors from 97 cobra/2.timing cover gasket ??? I'm checkin out a set of 42lb injectors from a guy who had them in his 97 cobra. I was wondering if they work with an 88 fuel rail? Just want to make sure before I buy these suckers. It says on his listing they will, just double checking...
  8. ALMOSTFINISHED

    Tonights UFC Fight outcome????

    Did anyone happen to catch the fight tonite and see who won? I am very curious and would like to know. PM me if ya don't wanna give up the winner on the thread. thanks Nick
  9. ALMOSTFINISHED

    Timing Chain Question

    I have a question about the stock timing chain. I took the front cover off and on the bolt that holds the cam gear on there was a washer/L shaped bracket on it. I was wondering 1. what is was, 2. what does it do and 3. do I need to install it with my new timing chain. Thanks guys Nick
  10. ALMOSTFINISHED

    ? About timing cover

    I finally got around to starting my H/C/I and s-trim install. I pulled everything apart, took the first 3 bolts on each side of the oil pan off and got the timing cover and water pump of as one. Now my question is how can I get the timing cover back on without pushed the oil pan gasket into the...
  11. ALMOSTFINISHED

    Forced induction headgaskets

    I'll be doing my H/C/I and s-trim install within the next 2 weeks. I am trying to round up all the gaskets and whatnot for the swap. I'll be using felpro gaskets for the upper and lower intake and timing chain front cover. As for the headgaskets, I hear cometic headgaskets pretty often. Where...
  12. ALMOSTFINISHED

    1.6 RR's stock Valve covers

    Just like the title says, can I run aftermarket 1.6's and use my stock valve covers or do I need to modify them? thanks Nick
  13. ALMOSTFINISHED

    HELP!!! Big problem

    Ok here goes. I bought the aluminum cyl heads from www.tristatecylinderhead.com for my car. Apparently they have 2.02 intake valves. I am seeing that some people say they will not work with my stock shortblock but then I am seeing that some people have run eddy's with the 2.02 intake valves. I...
  14. ALMOSTFINISHED

    F-cam questions

    How would an F-cam work on my stock shortblock with these heads http://www.tristatecylinderhead.com/catalog/product_info.php?products_id=29&osCsid=754cae3e6ea9f92330e44a7345cfaeac 1.6 roller rockers and an s-trim at about 12 lbs.?? Please help thanks Nick
  15. ALMOSTFINISHED

    Procharger p600b...any good?

    I'm checkin out a used procharger p600b set-up with 9lb and 14 lb pulleys along with an intercooler. I'm not to familiar with prochargers, are they dependable and strong? Any pointers would be great. I wanna make sure before I drop some $$ on this, it'll be on my stock shortblock with aluminum...
  16. ALMOSTFINISHED

    H/C/I swap. got some ??

    I'm doin the swap in the next 2 weeks and I have a few questions. I got the aluminum pro topline heads-supposivly equivalent to victor Jr's. Anyway I was wondering what is a good Headgasket to you for these, I'm gonna go with the fel-pro upper and lower gasket set again. As for roller rockers...
  17. ALMOSTFINISHED

    TFS stage 1 part number

    Just like the title says, anyone have the part number for the TFS Stage 1 camshaft for summit? Thanks guys Nick
  18. ALMOSTFINISHED

    Twisted wedges/stage 2 cam

    Is it any good/ possible for a stock shortblock or will there be p/v clearance issues. A possible blower down the road also. I have a little $$ to spend on the car so I figured I could use the rest of this stock motor for something good. Thanks guys Nick
  19. ALMOSTFINISHED

    Pro toplines vs. thumpers

    I'm in the market for some heads for my current 302 to hold me over for a while until I finish the 331. If you had to choose which heads to go with, what would you choose? They will most likely be going with my TFS stage 1 cam. Thanks Nick
  20. ALMOSTFINISHED

    03 crown vic e. fan

    I have access to a 2003 crown victoria electric cooling fan, it just needs a module which I can get at my cost for about 80 bucks. I was wondering if anyone has ever had experience with these fans and ow they do? Of course I would get the dcc controller also. Any ideas, please post em up...
Top Bottom
Back
Forums
Menu