Search results

  1. stang2.3t

    Winterizing.

    Okay Unfortunate for me! I just went out to check my car tonight... and to my suprise there is slush in the radiator and hoses... doesnt feel fully frozen... what should I do? I normally have enough Anti Freeze in the car. But it has gotten down in the negatives here wich is unuaslly cold...
  2. stang2.3t

    3 Inch Exhaust... I am looking for Some Pics

    If anyone has any pics of this being done I would be happy... I got my everything ran to about the rear axle. I would like to see how others have done there over the axle install. Just really tight back there and need a lil help to get it completed... Thanks Zach
  3. stang2.3t

    Tachometer Questions

    Okay I have completed the Heater core swap on my mustang.... I am now putting the interior pieces back together. While I have some of the cowlings all pealed off I wanted to hook the tach up to my dodge system. I have looked in my Haynes and Chilton’s Manual and they have nothing listed for...
  4. stang2.3t

    Heater Core

    Okay was searching a Heater core thread saw a site posted for a tbird removal. Has anyone done it like that in the stang. If not does anyone have a tech article for that process in an 88-90 stang?
  5. stang2.3t

    Help no power!

    Okay i just got done assembling everythign on the car and I am getting no power when I turn the ingition to the on postion. My battery has a full charge and I have everythign hooked up as far as I can see... Is there any suggestions on what I should check or what can be bad? Thanks for any...
  6. stang2.3t

    FMIC and radiator Question

    Okay I have been searching through the forum to find this question and not finding it to my luck. I have recently become the owner of a Volvo FMIC. Now I need to purchase a new radiator right now mine finally crapped out after a quick repair... it is just time. I want to only buy a new...
  7. stang2.3t

    Tach Signal feed.

    I need some help... In my Chiltons nor my Haynes Manual I could not clearly see what I needed... So I will pose the question you all. I have a 90lx Mustang... used to be 2.3na but thank God she has the 2.3T now. So what I need to know is wich of the wires is the Tach signal feed on the...
  8. stang2.3t

    Fuel Pump

    I just got the Mustang done! Then the heater core decided to go tits up.... Gotta love it! I have a 2.3T dropped in my 90lx convertible. I swapped in a T5 the A4ld is gone. I am using the Chrysler SMEC Computer set up. I am loving the little bit I have been driving her. I am using a T...
  9. stang2.3t

    Tranny Swap ?'s

    I did a search and found nothing that said it can be done. I have the T5 from a Turbo Coupe with hydro clutch, and I'm looking for info on how to convert my a4ld lx to a T5 hydro clutch. More so curious to see what is needed and the work involved with the swap. I have seen a FAQ and how to do...
  10. stang2.3t

    Need help

    Okay I am in the process of swaping out my 2.3 Na to the 2.3T. Now the only thing holding me up is getting the torque converter off and on the new engine. Here is the problem: The nutts that are on the TC Studs are rounded. I have tried heat socket, I would love to use vise grips, but I can...
  11. stang2.3t

    2.3T or 2.3Na Cam

    I tried doing a search to answer my question, but came back mostly with ranger roller cam threads. I just got done pulling the NA motor that I cracked the head on. Now the Cam in that engine is in pretty good condition compared to the one from his turbo counter part. Now here is my questions...
  12. stang2.3t

    BLINKERS

    Okay after doing a search on the fourm. I found a few related topics but none of it really helped me. Now my mustangs blinkers are not working nor have since the day I owned the car. I have been searching for the blinker relay for a bit and have had no such luck finding it. :bang: Now I...
  13. stang2.3t

    Engine paint removal

    Okay so I have been working on striping my JY 2.3 Turbo enging down and rebuildign it back up for about a month or so. I have all teh grease and grim removed from the block. I do have some stubborn spots of old paint that just doesnt want to come off. So does any one have any suggestions on...
  14. stang2.3t

    Turbo Coupe Spring's?

    Hey guys I would like to know if the Turbo coupe springs will work on my N/a Mustang. Unforntunatly my front springs are compressed and I launch my friggen car over every bump in the road. I have a turbo coupe parts car available to use to swap over. They look like they will work anyone else...
  15. stang2.3t

    NW All Ford Car Show

    Hey just to let everyone know there is an all Ford car show in Airway Heights tommorow registration is from 0900 to 1200. Look forward to seeing people there.
  16. stang2.3t

    Emissions help

    Okay I have taken my n/a stang down to the local emissions testing site now for the second time and failed. The first time I failed and gave it the standard tune up. You know plugs, wires, cap, rotor, and air filter. I used some carb cleaner in a tank ran that through, and then filled the...
  17. stang2.3t

    Searching For interior Peices

    I am looking for rear interior qtr panels for a 90 lx convertible. I know MSP has them but for a lot more then I want to pay. Does anyone know of any aftermarket or other used vendors that may have them? Otherwise I will be getting jiggy with some fiberglass and start playing mad scientist.
  18. stang2.3t

    How do you tell if your turbo is good?

    Okay I am new to the turbo market. I recently picked up my used turbo and was wondering if anyone can tell me sure tail sign that it is good nor bad?
  19. stang2.3t

    Lowering/Sport springs for 2.3

    After a bunch of looking around I have come to the conclusion that only two companies make lowering springs for the 2.3 mustang. Racer Walsh and Eibach. I have read the reviews on the Eibach, but nothing on RW. Has anyone here had the opertunity to install the RW springs :shrug: and if you...
  20. stang2.3t

    Convertible Top Problems

    Okay here is the deal. For some odd reason my top will not come back up. I hit the switch and you hear a clicking noise in the rear and nothing happens. I have looked in the Chiltons book and have found nothing that is helping me trouble shoot. Can anyone help me out?
Top Bottom
Back
Forums
Menu