Search results

  1. Blown331LX

    Installing P600b Procharger FROM SN95 onto Foxbody... Anyone swapped one of these??

    Im getting a nice P600b Procharger setup from my buddys 1995 5.0 and looking at putting it onto my 1991 LX 5.0 which has a brand new 8.5:1 all forged 331 with an F303 cam built for boost... I know I will have to relocate battery to the rear. But only other initial major issue I can think of off...
  2. Blown331LX

    1986 Mustang GT Convertible 5spd - 90k orig miles / Stock - Needs Work but easy resto

    I got this car on a trade for a Jeep Grand Cherokee (That I had over $2800 into) I had a while back, and I have yet to do anything with it. The previous owner drove it 45 minutes to meet me and drive the Jeep back home. It is a mostly bone stock original 1986 GT convertible factory 5 speed with...
  3. Blown331LX

    Help w Quarterhorse on 331 & My A9P is no good / What are possible causes of failure?

    My current car is a 1991 LX, original 5.0 automatic car. I bought it not running with a 5 speed and pedals already installed. I got it running then put my 306 in it and got that running till I discovered a broken piston, so now it has a 331. Ever since Ive owned it, there have been running...
  4. Blown331LX

    Engine Noise in 306.......out of ideas

    So the noise is a rythmic ticking sound that changes with engine rpm. Cold engine start noise is not there and engine runs well, runs for a minute or more and then starts and will get louder. If any of you have ever heard a lifter tick it is the most common sound to this. History on the engine...
  5. Blown331LX

    Fuel pressure issues..... Confused....

    Want some input from you guys... Okay so her is the issue.... Im running a BBK 190lph pump feeding into a BBK adjustable regulator. Fuel pressure with engine running and vacuum supply OFF of the regulator is 45 psi. Attach vacuum hose and goes down to 40 psi... when I open the throttle fuel...
  6. Blown331LX

    WTB: In need of a 91 LX front bumper & Cowl Hood

    I would prefer to have one a rio red w/ black moulding front bumper cover and also at least a 2.5" cowl hood. They dont have to be red but I would love to keep from having to paint them.. PM, or email: [email protected]
  7. Blown331LX

    Aeromotive A1000 Fuel Pump - $150 OBO

    Removed from a running show car with less than 2,000 miles on build, about a year ago and been in storage since, too much fuel for my build. Asking $150 OBO, may trade for other parts, sold as is... PM or call 919-923-4979 Chris Link for more info... Aeromotive | 11101 - A1000 Fuel Pump
  8. Blown331LX

    Notchback interior trim quarter panels. Exc Cond

    I have a nice set or original rear interior quarter trim panels that will fix any Foxbody Mustang Notchback / Coupe only, grey and black, never painted no cracks. Cleaning out garage and need to go, asking $60 for the pair OBO, Also will trade for the same panels for a Hatchback. Prefer not to...
  9. Blown331LX

    Edelbrock Victor Jr Intake & Holley Carb, Dyno Tuned for 306 / ready to run $400 OBO

    Just removed from my daily driven street car, everything is like new and has less than 10,000 miles, going fuel injection in another car with the engine. Edelbrock intake is lightly used but like new, also comes with fuel pressure gauge, chrome Holley air filter, Jegs fuel line and Jegs billet...
  10. Blown331LX

    MSD Billet Distributor #8479 - SBF Ford 5.0 302/351 - LIKE NEW - $200

    Purchased brand new and used for less than 10,000 miles, removed from daily driven 306 street car that put 320 hp / 320 tq to the tire on dyno. When this distrinutor is purchased new it comes with a bronze gear and a higher strength gear is required when used on a roller camshaft. I have the...
  11. Blown331LX

    Lakewood Bellhousing #15002 for SBF - SFI appvd - Make Offer

    Removed from a show car because paint started to flake off. I bought it thinking it would fit my T-5 but it will not, pretty much fits everything else. I removed the rest of the paint and prepped for paint just havent painted yet. Hardware not included... see link below for more info... Asking...
  12. Blown331LX

    1990 Mustang GT - ROLLER - New Interior, Big Block Project, MAKE OFFER

    I decided to remove the small block and suspension from my daily driven street car to another Foxbody, and to build a big block to back in it. Well..... I just bought a Lightning and can't keep all the toys.... This car has been professionaly built from the ground up and has been daily driven...
  13. Blown331LX

    Black 1990 Mustang GT - Roller - Big Block project - Make Offer

    ... REDUCED... new add
  14. Blown331LX

    Challanges with properly tuning a carb for turbo or blower??

    What issues come with properly tuning a carb for turbo or blower?? Im running a Holley 750 topped 306 with forged pistons and a F303 blower cam...just no forced induction yet. Car runs great the way it is but thinking of adding boost if i keep it. Ideal choice would be a roots style blower...
  15. Blown331LX

    1990 Mustang GT, 306, H/C/I, 5 lug 4 wheel disc, 18"s, New everything

    This car was professionally built with no expenses spared. I have owned it for over 3 years and bought it as a rolling chassis, then built the car from the ground up. I easily have over $10,000 in parts, not including any of my time or the cost of the car initially. Everything on the car was...
  16. Blown331LX

    Needing suggestions for a New Clutch.... FRPP/Sachs/Zoom/Hays/Ram/Centerforce???

    Ive got a 1990 GT with a freshly rebuilt T5 behind a 306 with H/C/I and Holley 750. Car runs a 275 back tire and 4.10 gears. Mostly all hard street driving, never seen the track but car is 100% track ready. The car is currently NA but may see a blower in the future. The most recent clutch setup...
  17. Blown331LX

    1990 Mustang GT. 306, 5spd, 5 lug, 4 wheel disc, $15,000 invested, F/S or trade

    I hate to even think of parting with my baby, but Im wanting a newer Cobra and trying to get the funds to do so. Im very happy with my car and do not need to sell it, however if the right offer comes along I might jump on it. This car has been professionally built with no expenses spared. This...
  18. Blown331LX

    NX Nitrous System for 4150 style carbs

    Like new complete kit, I bought used from a guy about 6 months ago. The is a wet kit and a plate system that is adjustable from 150-250 hp. The bottle neck and brackets are all chrome, this kit was not cheap and is hardly used. All I did was install the bottle and line then decide I wanted to...
  19. Blown331LX

    HELP.. Too much fuel pressure coming from new regulator

    Hello to all, I have recently swamped a Holley 650 DP onto my 306, and havent even started the car yet with the carb and the new fuel system. The OLD fuel system gave me no issues what so ever and consisted of a Holley Red pump (7psi) and 1 single 12-803 regulator and a Carter carb with vacuum...
  20. Blown331LX

    What carb would you guys put on a 306?

    Engine is in a 1990 GT, .030 over forged flat tops, stock rods, Patriot Heads, F303 cam, BBK longtubes, full MSD ignition & dist, Holley red pump, Victor Jr Intake, World Class T5, 4.10 rear, naturaly aspirated for now but will have the bottle before too long, and will only be 75 to 150 shot...
Top Bottom
Back
Forums
Menu