Search results

For a week or so my 89GT has had a rough idle and a decent miss . When you first start driving it , it'll kind of hesitate and miss but if I get on it hard , it'll clear up and just have a rough idle . Well I just threw a set of plugs and wires on it (the ones on the car were a few years old)...

I know these threads probably come up alot but I HATE the way my car sits . When my '89GT was all stock it sat even front and back and looked pretty good . Well I put new FRPP front control arms (used the stock springs) and new 90/10 struts . The rear has lakewood lower control arms with...

Just like the topic says I have brake lights but not until the pedal is all the way down , anyway to adjust this ?

I got a set of nice upper and lower control arms I want to put on my GT , never did it before anyone so how do I go about it ? Also would I be better off welding the seams on my torque boxes or buying one of the torque box kits of LRS ?

I just replaced a lower intake gasket because it was leaking around the front coolant port . So I went ahead and replaced the lower intake gasket with the MS93334 set , everything is torqued to spec and went together fine . The car fires right up and idles , but it's popping in the intake and...

I just got a set of strange adjustable rear shocks for my 89 GT , I'd like to get a set of nice upper/lower control arms while i'm at it . What would be a nice set of control arms that will help at the track but still be ok for daily driving ? I've looked at BBK , UPR , Lakewood , etc. not sure...

I was given a prothane polyurethane transmission mount when I did my T5 swap. I'm just now learning that you shouldn't use a polyurethane trans mount without poly or solid motor mounts. The car is my DD '89 GT so will I be able to sneak in a set of poly motor mounts by using a piece of wood and...

On my '89 Gt there's an electrical connector that comes off my driver's seat belt and one under the center console where do these plug into??

Just did a heater core in my '89 GT and buttoned up the dash,console and everything. But now i have no blinkers and my blower motor isn't getting power , and there's two connectors under the dash that are disconnected but i don't see where they would plug into. I can get pics up tomorrow but...

I have a brand new T5Z from Tremec that I put in last week , I put 250 miles on it so far and it ****s great and everything but i am nervous about some noises. 1st gear is fine but in 2nd at 2500rpm it will whine ( like a blower) then quiet down , and it whines a little tiny bit in 3rd if you...

My '89 GT will fire right up when it's cold but after it warms up it's got a hard start. It's been doing this for a few days now when i stop at the mini mart or to get gas on the way to work. When it's warm it will turn over fine for a split second then turn over very slow and fire up. I...

Alright guys my daily driver '89 GT is a stock longblock bolt on car that runs in the 13's. I broke a regular T5 and went with a G-Force T5 and it was nothing but problems so now I'm in the market for a new transmission. I'd rather not have to go with another T5 and I'm against any "built" T5's...

I'm buying a new T5 for my daily driver '89 GT. As of now I have full exhaust,street heat intake,70mm throttle body , CAI and 3:73's. I'm looking to get trick flow heads and a cam over the summer. Does anyone happen to have any feedback on the T5Z and will it hold up behind a h/c/i car?

I'm having a problem with my sound system in my'89 GT. My car originally has the premium sound system.I bought a JVC headunit and some regular Pioneer speakers and bypassed all the factory wiring, I now have a new power , ground ,and speaker wire ran . It worked great for awhile(one year so...

Finally got a chance to run my car for the first time since I put the 5speed and some bolt on's on it. How do you think I did? My car is a full weight '89 GT with , Gforce syncro'd T5(2.95 1st gear) , 1 5/8 BBK Shorty's/catted x pipe/dynomax catback with race bullets,3:73's, Trick Flow street...

I just picked up a set of two front seats out of an '85 GT (they're gray with the red piping and halo headrest) The passenger seat is perfect but the driver side needs new upholstery on the upper half. It's just zippered on so does anyone make upholstery you can buy individually? I'm keeping my...

My '89 GT has all stock suspension(save Ford Racing A-Arms) and the front sits higher than the rear of the car. The car is my daily driver that will see the track on nice days. I'm looking for a set of that will lower the front to be atleast even with the rear and wont negatively effect...

Last night I installed the Maximum Motorsports clutch quadrant,firewall adjuster , and their oem Ford clutch cable. With the FWA threaded all the way out I still have alot of freeplay. I can freely move the pedal about a 3 inches which is much more than the 3/4 inch of play my BBK kit had. Any...

The front slip yoke that goes into the tailhousing of my T5 is worn and is causing a leak. I don't have the funds to go buy an aluminum driveshaft does anyone know where I can order a replacement yoke the only one I found said it was for aluminum driveshafts?

I'm trying to find a replacement yoke for my driveshaft. I need the front yoke(the on that goes into the tailshaft on the transmission). All the ones I have found have been for the aluminum driveshaft?