Search results

My son has a 93 lx came in this morning said car had run out of gas. We put about 4 gallons in and now when we turn the key the pump will not prime no sound coming from it at all car cranks strong but seems like no fuel . opened the little fuel line valve while he cranked and got no fuel at...

Any body have a step by step for timing cover removal? We cracked the water pump flange trying to remove broken studs. So now small job turns big. I know we have to loosen the oil pan in front, is there a gasket that just fits the front of the pan or do we have to drop the whole pan and change...

My sons 5.0 had a radiator leak . His is 5 speed manual trans. My friend had a 5.0 radiator from an automatic. I was told that they were the same except for the trans cooler fittings .Radiators foot print is the same but it seems to be leaking from the trans cooler fittings. Now for the stupid...

Just installed a grannitelli front shaft loop on my 09 Bullitt. We did'nt realize that we should have removed the heat shields as per the picture. We were able to catch threads on the studs after a percussive adjustment of heat shield. My question is this if I remove the heat shields and what...

Went to englishtown raceway park last night. Second time in my life racing at the strip first time with the vortech. Only made one pass ran a 13.34 with street tires. R/T was .341. 60 WAS 2.17 MPH was 109.24. All in all happy with the times . If I can get the car to stick in second gear I think...

OK so I'm on the last leg of my drive home tonight . Wanted to get on it a bit on a back road nice straight run out . Start out hot through 1st when pulling to 2nd my foot got ahead of my hand and i let the clutch out to fast and 2nd would not engage. Got off it right away and still have 2nd...

Just got home from Brenspeed This morning. Vortech install, delete plates,Kooks long tubes w/ high flow H pipe ,vent gauge pods with a/f and boost gauge and black valve covers. Dyno runs were made yesterday afternoon at Brenspeeds new shop in Indiana [yes I drove from NJ to Indiana]. Car ran 436...

Well Im gonna pull the trigger and get blown on my birthday. Going to Brenspeed .Arriving 6/29 and getting kooks long tubes w/ high flow catted H pipes and vortech 3 system [non intercooled] installed.For now I hope this satisfies my need for speed. If not can always upgrade in the future...

To by-pass the heater core do I just make some sort of jumper and install it on the two hoses that go to the heater core at the fire wall?

Anyone have any history with "Joe Heck racing / Big Daddy performance" in Lakewood NJ? Quality of work? Quality of custom tunes?

Have replacement seats ready to install did passenger side no problem [its manual]. Drivers side is power seat and seems to be locked in the all the way back position. Motor lets seat go up and down ever so slightly but not back and forth. We can not get to the rear bolts holding the seat...

will the seats from a 94 front seats fit in a 93 5.0 lx? any help please.Manual

Just bought a 1993 5.0 lx. Body is in great shape light blue or teal I guess. Started to overheat yesterday when my son was out driving[18years old].Tell him to park it and I drive to where hes at. Find a hose with a hole in it .Small hose "l" shaped from themostat to water pump heater hose I...

Any body have input on 1993 5.0 with 108000 k on the clock. New clucth, tires and windshield. What should I look for and how much do you think I should offer. Don't want to insult the guy . Blue book says 3k good shape .Car has no rust and is semi clean inside. Any issues with these I should...

Went to Tillman Speed today. Great shop, friendly people. Got a couple of shots of the Edelbrock s/c install they are working on. Neat install looks like a stock part at first glance.

STATE POLICE - NJ TICKETING Here's the latest NJ State Police Initiative (Radio Station 101.5 FM confirmed this info). Starting today, New Jersey will launch 30-day speeding ticket frenzy. The state estimates that 9 million dollars will be generated in speeding tickets. One million dollars...

Anybody have any input good or bad on the "slp powerflo axle backs? Saw them at American Muscle for what i think is a good price .I drive an 09 Bullitt and want the tone just a bit louder. Not annoyingly loud but just a bit more then the stock bullitt system.

Anybody have any input good or bad on these "SLP Powerflo axle backs" found them at American Muscle for what i think is a good price .Before I pull the trigger just looking for some feedback. I drive an 09 Bullitt and want it just a bit louder.

Looking to buy a donut spare for my 09 Bullitt . Hear that the spare from 07 Mustang [donut type] will fit . Yes I know that this spare is a 17" but still would be better then the inflato kit thats back there now. Anybody selling one or know where to get one .Please let me know.

Getting a gas cap error message .Checked gas cap of course. pressed reset button . Message returns every ten minutes or so. what causes this? and how do i get rid of it?