Search results

I need a manual seat slider for a 95gt. ( drivers side only) Let me know if you have one for sale. Thanks

delete

For sale two sets of rocker arm studs taken out of two brand new sets of 1388 AFR heads, nothing has ever been on these studs. They are 3/8"s in size, two sets of 16 each. $25 per set. I used 7/16'th so these were removed. They are 1 7/8" from the bottom flat part of the stud that sits on...

1. What is a good high volume water pump to run on the 302 Mustang, using the orginal timing cover. This will be the reverse rotation, I guess. 2. How much slack should there be in a new double roller timing chain set. Mine appears looser than it should be. Probably over 1/4 inch slack...

<table border="1"> <tr> <td></td> <td></td> </tr> <tr>Pictures of engine block/build and donor car sans engine. <td></td> <td></td> </tr> </table>

On my 347 build I'm finally to the point to put the timing set on. When I bought the engine it came with a cam retainer with hex bolts in the front. Now that I have broken the bearing behind the Summit performance timing set I'll ask the question. 1. Is the retainer suppose to be cut out to...

Will a lakewood 15202 bellhousing match up to a 95 GT with a tko-500. The adds keep stating it works on a 1979-93. If I have to change out the cable etc that's not a problem. Thanks.

If the difference in the 87-93 long tube headers and the 94-95 headers is the location of the fork on the tranmisson, one is at 9 o'clock and one at 7 Then where does the fork come out from the tko-500 tranny. In other words does the tko-500 tranny allow you to use the 87-93 headers on a 94 or...

I've done a number of searches but can't really find a definite answer. Is there any real difference in brand?? name of injectors. I know Bosch is good and also $$$. Accel or Ford SVO, any real differences in quality. What do some of you use. Thanks --- Have a good Memorial Day.

From what I can read TF has some upper intakes with a larger mm size such as 90 or so. What is the standard size of say the perfromer rpm II or the holley systemax. 75mm perhaps, I can't seem to come up with the info. The sticky for flow rates seems to have expired on the board or I can't...

The afr 185 heads I'm looking at call for 3/8's rocker arm studs, is there anyway to change these to 7/16 or get to 7/16 without a major deal.

Looking for a distributor for my stock 95-302, but need something that will work when I get the 347 stroker working. Have looked at a msd but by reading some of the comments on previous threads not everyone seems to be in love with msd. What is a good distributor for this situation and the...

I have looked at the tech. help pages and read quite a bit of info on the 347, but was looking for first hand/user knowledge as to what is the best way to build a 347. Whomever put the tech. pages together did a great job!!! Just bought a used 95gt, but have another 95 engine in my garage that...