Search results

i getting the final pieces for my 5 lug swap and I see late model has the plug to do it for $18 or you can get the kit from mm to delet it for $30. These seem like things I could get at the hardware store for a lot cheaper? Has anyone done this?

My car is a 1988 mustang aod, 306, hci, bang turbo kit, pmas mass air blow threw. So this weekend I swapped out my aod this weekend for a better one. now i start the car to fill the aod it idles fine i notice the ps head gasket it leaking antifreeze. so then i swap out the head gasket. i get...

I was looking on mustang unlimited and see Motive Gear Performance 4.30:1 Ring & Pinion Set for $190 are these a good brand or who should I go with? I notice ford racing doesn't make 430 gears or at least not on cjponyparts websit. and can any one give me legit gas mileage difference with 430...

my 1996 cobra will not start. it cranks good but doesn't even try to start. I got it to start once after holding my foot down on the gas pedal. after it started this way I could rev it but after letting off the gas it quickly dropped in rpms and died. I just got back from a 2400 mile round trip...

need to know what exact year engine harness I have. it has mass air, it has one black relay by the mass air. it has one brown connection by the obd1 port. what else is needed to know what year it came out of? and if any one knows what those two components are in my last two pics that would be...

where is the best place to wire in the tach single wire off of my msd box? and please be specific with wire colors and where they are at. im working on a 1988 mustang 5.0.

I was looking at aero motives fuel pump wiring upgrade and was wondering If need it. Also $70 seems alittle steep for a relay and some wiring. Can I make this kit with parts from the auto parts store and wire it in? The aero part number I'm looking at is Jegs number 027-16301. I plan on runny my...

Just got my new carpet in for my fox. It bought it would come with all the factory holes cut out but it did not. So what is best to use to cut this carpet to make it look as nice as possible

my fuel gauge has not worked in my fox since i bought it in 2005, i have replaced the ending unit in the tanks and swap the gauge cluster, non of this has done anything. my fuel gauge just stays pegged up in the full fuel position. i need a wiring diagram and some one that knows what wires to...

i have a engine wiring harness out of a 90-91 mustang i need to know how hard it would be to get this harness to work with the 86 dash and interior harness? plus do i need to swap to a v8 interior wiring harness or will the 4 cyl one work? thanks

i want to get some new siemen deka injectors. im going to be running a 75mm turbo'd 306, afr 185 heads, system max intake, 75mm tb, stalled aod. im looking to run 9 lbs of boost and i need to know what injectors i am going to need. i would like to get a set of 60 or 80 lb injectors, my question...

i have a 1996 mustang cobra for sale. it has 95k miles. Color is black with black leather interior. recent maintence includes -new ford racing clutch -new front ball joints on both sides -new front and rear brakes, both motorcraft brand -new front ball joints -newer ford racing clutch and throw...

When my aod is cold (first thing in morning, or on cold days if I let it sit for a few hours.) it will not shift easy at all. I have to rev it to 5k rpms to get it to shift into 2nd or drive for awhile normally and then it will shift. Also first gear doesn’t act normally before you get it to...

what do you guys use? im using a spal on one of my cars and really like it but i cant seem to find one for sale at a good price. so im looking for other opitions.

My cobra is leaking oil behind where the oil filter goes on, it has a small pin size hole on the adaptor, plus it’s leaking at another spot it looks like on the adaptor as well. Is that an adaptor that comes off or what? All post some pics. I got the spots that are leaking circled on the pics...

I’m putting the hubs, brakes, and shocks from a 90s 5.0 on my 1986 lx four cyl. I’m having trouble with the shock lining up right in the shock tower is this normal? I took off the bracket that is riveted in to the top of the shock tower and I can get the new shock to go thru but can’t get the...

I put a k&n filter on the end of my mass air meter on my 1988 mustang, the mass air meter is a stock one off of a 90's stang. Well since I put it on some times the car will idle rough and it runs a lot leaner than it used to when I just drive normal. I have an aem wide band to measure a/f...

do the ball jounts on these press out like other mustangs or are they built into the lower control arm in the front? lmk asap thank you

I burnt my harness on my exhaust and need help. I have 3 o2 wiring harnesses. Two are different from my original. My car is a 1988 mustang with a aid and has a mass air swap. Ok my original harness only has 5 pins that come off where it hooks into the main harness. The color codes on the wires...

i seen a 1987 tc in the junkyard that still had the rear brakes and all on it i just want to know what do i need to swap them to my 1988 mustang gt.