Search results

I want to post a picture of my car in the picture thead. How can I move a picture from another thread in the tech section to this thread?

I have my MSD 6al located in the trunk with the rev. limiter. I had not had any problems until last year all of a sudden my car turned off and would turn back on. I by passed the msd and the car worked so I took it off along with my boost retard and sent them to msd to get checked. MSD fixed...

Did anyone running a head and cam package and an S-trim have problems with the idle and surging with the stock pcm right after installing it? I turned mine on yesterday but it appears to be running extremly rich and surges really bad with I try to accelerate it the car dies out. I have yet to...

Did anyone running a head and cam package and an S-trim have problems with the idle and surging with the stock pcm right after installing it? I turned mine on yesterday but it appears to be running extremly rich and surges really bad with I try to accelerate it the car dies out. I have yet to...

After four months of overhaul I finally started my car today. It started fine until the power steering pump pulley came off. The car seemed to idle decent with a little surge now and then.( I only had it on for about 2-3 minutes) I removed the power steering pump pulley and started the car...

I accidently installed my pulley too far in the shaft I had to remove it and reinstall it. When I was reinstalling it, it seemed like it went back in to easy and when I sarted my car the pulley started to come out and the belt started to come off I turned the car off and removed the pulley...

I would like to see if someone can post picures of my valve covers and intake if I email them to you. Pictures are really neat of my fox body valve covers on my 94 cobra and my 94 cobra intake. Please leave your email and I will forward the pics.

Does anyone know which spark plugs I should use for my application? I have a 94 cobra with a fresh 306 with low compression pistons, Trick flow track heat heads, Vortech S-trim 10-12 pounds with powerpipe, Msd ignition with boost retard, 255 intank and T-rex. I used to have the cast iron...

Which is the Anderson valve cover Part # that will clear 1.7 rockers and the intake. I beleive someone said they where chrome but want to make sure and order the correct ones if I need to.

I am completing my rebuild 306/w S-trim. Currently I have 30# with a Cartech adjustable FMU and Aeromotive regulator. I have also installed a 255 intank and a T-rex inline. I have already purchased 42# with the meter to tune my car without the Fmu. However I wanted to break in the motor prior...

I am completing my rebuild in the next few days the motor is in the car just finishing up some clearance issues with the vc. Here is what I installed: forged dss low comp. pistons .30 over 306, blanced stock crank and rods with arp hardware, main girdle, Twisted wedge track head head with 1.72...

I have a 94 cobra that I am overhaulin. I installed a pair of Trick Flow Street Heat heads on my car with 6.75 Trick flow push rods and Sorpion 1.72 rockers. My stock valve covers dont appear to clear the rockers they hit on the studs for the rockers. Has anyone installed taller Valve covers...

I got a new 306 shortblock with Dss forged low compression pistons this week at the fun ford weekend event. I am going to get a new set of heads this week should I get the Trick Flow Twisted Wedge or the AFR's? I also ordered a trickflow stage one came since the pistons are set for Trick Flow...

I've been wanting to post pics but have not been able to do so. Will anyone be able to post some pics of my car If I would email them to you?

I have a 94 cobra with an S trim and will be replacing my shortblock very soon. Does anyone know if the DSS bullet 306 with forged low compression will hold up I am running 10-12 pounds. I know Dss recomends there pro bullet but curiouse to know if the base bullet will hold. Cant be worse than...

For some reason my cars coolant overflows under hard acceleration and causes belts to slip. It also looses coolant under normal driving. The car does not miss at all and no water is in the oil, and the car does not smoke at all. I recently replaced my 3rd set of headgaskets which appear to burn...

I am going to purchase a DSS bullet 308 but I would like to know what combustion chamber size these heads have on my 94 Cobra. DSS asked so that we can figure out the compression on the engine since I have a Vortech S trim we don't want to much compression. Any body know what is the most...

:shrug: I just completed swapping out my third set of headgaskets on my car. It is a 94 cobra with Vortech s/c. It seems to keep burning my coolant passages on the gaskets. The first two time I replaced them with stock Fel-pros this time I went with Mr Gasket ultra seals. I thought I had a...

Hey guys my name is Danny and I just registered yesterday and would love to post some pics of my car and an avatar but not very oriented on computers or digital images. I have all the hardware just never used it before to post pics. I would appreciate any help from putting my card in the...

This is my first time sending a thread so forgive me if I do this wrong. I am having problems with my cooling on my car. I have installed new hoses,Fluidyne radiator, wired my fan on high with a relay, Autometer mech. temp. gauge, The problems started when I installed a vortech s/c. I...