OK I have to work the next 6 weekends in a row, Ya I know It sucks monkey n*ts, but I m getting ready to do PI intake and head swap was wondering , if its possible to do the intake in 6 hours or less ( Sunday = wife time 
)
)3 friends , 6 hours, PI intake..???
- Thread starter rice slayer'
- Start date
-
Sponsors (?)
to just disassemble the intake or replace it with the new one? or do the entire headswap and now all you need is the intake? need more info.
LI98GTStang
Founding Member
Sunday=Football time in my house. Got to have some boys to outnumber the girls. 
Yes, you can do this job with help in under 6 hours. That is the time it took me alone - including cleanup- and I tend to work on the slow/safe side. Just make sure you don't have to drive the car right away so you can let the RTV cure some.
Yes, you can do this job with help in under 6 hours. That is the time it took me alone - including cleanup- and I tend to work on the slow/safe side. Just make sure you don't have to drive the car right away so you can let the RTV cure some.
streetstang03
unModerator
bdcardinal said:
i was just going to post that comment. I would definetly wait to do both at the same time as well. would seem like a PITA to do it 2 times.
Thanks fellas' good input, saved me a hell of lot of timedoing it twice, now were can I pick up a set of pi heads, pi cams, and pi intake at?? with out getting a** raped from my wallet?
Sick96Stang
New Member
E-bay is the best place to find a set of used PI heads and intake but for new the cheapest place I have found is http://performance.parkwayfordga.com/Headswap.htm
the PI intake won't match up with the non PI heads, you should just wait till you get the heads too.
kboy262
Active Member
Wait and do both. The cam swap was easier than messing with the PI intake. It took me about 4.5 hrs for the PI intake swap. If I was doing the headswap I would wait. Hate to do the job twice.
pi intake swap took like 3-4 hours the first time, 2 hours the 2nd time (was stupid and sealed wrong). its worth it for cheap bucks. good mod if you're waiting to put on heads (thats what i did). its really not that hard, its not like tearing down a whole motor.
