3G Alternator Wiring

[FastStang 2]

Hey guys. I'm doing 130 3G upgrade I need some help with the wiring would you guys post some pics or a link Thanks.

 

[Skoobie]

Here are a few along with my original thread with a couple photos.


See http://www.geocities.com/smithmonte/...or_Upgrade.htm - all the tech data you could ever want to know
OR
http://www.mustangcentral.net/tech/alternator.html
(Those are jrichker's Links)

This one is mine. Shows what NOT to do and what I did to correct how I flubbed it up It may help with hurdles you run into, there was a lot of input from the guys on here that will help you out

http://forums.stangnet.com/showthread.php?t=591979

 

[jrichker]

See the sticky "Useful Technical Thread Index " at the top of the forum. The 3G install instuctions are in there.

 

[Skoobie]

**Deleted Because I'm a dumbass**

 

[FastStang 2]

Did you use the stock adaptor or the 3G adaptor ?

 

[FastStang 2]

Thanks a lot guys i just don't want to fry my *** that's why ask to be 100% sure of what i'm doing.

 

[Skoobie]

My alternator came with the harness conversion.

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=PA-462802A 1&comp=LRS

 

[tbovee]

There's no picture in the link for the adapter. You are not going to use the old wires to the solenoid right? Dont forget the extra ground.

 

[FastStang 2]

Ok... It's all good you guys it's done . Now i see the difference better idle.I can put the head lights on , audio system, air vent on high, def on, fog lights and no problem at all nice thanks for the help.