Okie dokie, I tried everything on this bracket and only ended up cutting nine welds.......
The 1/2” belt sander was working great, but overheated after four welds.
The Blair cutters work WAY better than hf cutters! This wore me out though. Laying on my back and holding the drill over my head against that little spring loaded center bit gets really, really tiring.
My grinding wheel worked great too, it’s just noisy as hell.
I had to stop to get cleaned up so I can watch the debate tonight.
I don’t know what the difference is about this side, but it seems quite a bit more difficult than the other side. This is easily the most physically challenging part of working on Booger so far.
Tomorrow night I’ll get the other 14 spot welds on this side.
The 1/2” belt sander was working great, but overheated after four welds.
The Blair cutters work WAY better than hf cutters! This wore me out though. Laying on my back and holding the drill over my head against that little spring loaded center bit gets really, really tiring.
My grinding wheel worked great too, it’s just noisy as hell.
I had to stop to get cleaned up so I can watch the debate tonight.
I don’t know what the difference is about this side, but it seems quite a bit more difficult than the other side. This is easily the most physically challenging part of working on Booger so far.
Tomorrow night I’ll get the other 14 spot welds on this side.