Hey all, new to this place, awesome site. Anyways, i got a 1995 Mustang V6 5 speed that today i got my hands on a thunderbird sc supercharger with piping and intercooler. Now my question is, can it be used on a mustang application? What's involved in doing so? Any help would be greatly appreciated.
95 3.8L V6 Supercharged?
- Thread starter Raytown
- Start date
-
Sponsors (?)
nmcgrawj
Advanced Member
You're in the 5.0 section. I think there is a 3.8 mustang site somewhere or a general v6mustang site. Google them.
I couldnt even say if this site has a v6 section, i've never looked for it!!!
Good luck.
I couldnt even say if this site has a v6 section, i've never looked for it!!!
Good luck.
reddy351
10 Year Member
Since you're here and you've already asked....you'll need the heads, too. They are different from the standard 3.8 heads. The ports are a lot bigger on the SC heads.
Actually a donor car with all the intake tubes and connectors (and engine brackets and such) would help a lot.
You won't have to upgrade the tranny as both the auto and stick cars use basically the same trannies as the V8 cars. The rear diff should be on the "replace" list but one from any SN95 GT (94-98) should fit perfectly.
I've considered finding a v6 car to do this to. I think a 351w with a Tremec would be a lot simpler, though.
Good luck!
Actually a donor car with all the intake tubes and connectors (and engine brackets and such) would help a lot.
You won't have to upgrade the tranny as both the auto and stick cars use basically the same trannies as the V8 cars. The rear diff should be on the "replace" list but one from any SN95 GT (94-98) should fit perfectly.
I've considered finding a v6 car to do this to. I think a 351w with a Tremec would be a lot simpler, though.
Good luck!
Similar threads
