Hopefully the piston is okay. What springs you going to run? What cams you got?
Im getting comp cams springs and I have Sean Hyland stage 2 cams in the car.
Hopefully the piston is okay. What springs you going to run? What cams you got?
Yep. That'll make some noise. You're really having to sort out this valvetrain. Hopefully that fixes all of it.
Just a tip, every time my IAC went bad I had to disconnect the battery and reset the pcm so it cleared all the last bad values of every sensor and relearn everything. Did you try that? Worth a shot and is easy
I’m back, and wow! I’ve never seen so many broken rockers before!! Do they make upgraded rockers so you stop breaking them? They are easy to replace. As far as unplugging the maf to being idle down I dunno why it’s doing that I would love to hook my my scan tool and see what the maf sensor readings are at and other sensors.
No its a 4v DOHC 4.6L engine for the Mach One. I know how to change the rockers though. The new rockers I bought are different in the style compared to the Telling rockers. I'm not to sure on how to install them but my buddy is going to help.Huh... well I’ve done lifters a ton of times and you have to remove the rocker to do them. You have a 4.6 sohc engine right? All you have to do is remove the valve cover, turn the crank so that the cam lobe is facing up on the rocker, and pull it out. Unless there is something special about the heads you’re using? I might be missing some info on your set up