there was not a Black/white wire either. Thank you for the above schematic. I was going to stop by store today for wire and rewire the missing black/white and white/red and properly place all wires into EEC/VIP connector
I wish it was but it was not. i peeled back the harnesses to center of the firewall and it was clean and gray/red also peeled covering back to the coil and to the firewall. no white/red wire to be found......
It seems like when they removed the smog and thermactor stuff they removed all the wires too so it would look good. I had almost the entire loom open under the hood and those 2 wires are not there.
I wish it was but it was not. i peeled back the harnesses to center of the firewall and it was clean and gray/red also peeled covering back to the coil and to the firewall. no white/red wire to be found......